Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Detect Blur . Camera releases the shutter automatically when it detects image blur to camera and subject movement are minimized. Detect Panning . When panning, the camera releases the shutter automatically when it determines there is no blur in the subject being followed. Detect Smile . Camera releases the shutter automatically when it detects the subject is smiling. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the third Control Panel option from the top (Auto Shutter). 3. Use [4] and [6] to select the Auto Shutter type and then press [SET]. To use Detect Blur to minimize image blur (Detect Blur) 1. Point the camera at the subject and half-press the shutter button. Wait until the camera adjusts exposure and focus automatically. 2. Press the shutter button the rest of the way down. The camera will go into a standby mode and start detecting hand and subject movement. The camera will release the shutter automatically the moment it determines there is no image blur. •“0 Auto” flashes on the monitor screen while detection of image blur due to hand movement or subject movement is in progress. Indicator: The indicator color changes from red to green when the camera is getting ready to release the shutter. Snapshot Tutorial 30 To use Detect Panning to minimize image blur (Detect Panning) 1. Point the camera at location where the subject will pass and then half- press the shutter button to adjust exposure and focus. 2. Press the shutter button the rest of the way down. This will put the camera into Auto Shutter standby. Move the camera to follow the movement of the subject. The camera will release the shutter automatically the moment it determines there is no blur in the subject you are following. Indicator: •“0 Auto” flashes on the monitor screen while The indicator color changes panning detection is in progress. from red to green when the camera is getting ready to release the shutter. To use Detect Smile to record when a subject is smiling (Detect Smile) 1. Point the camera at the subject and half-press the shutter button. Wait until the camera adjusts exposure and focus automatically. 2. Press the shutter button the rest of the way down. The camera will go into a standby mode and start detecting whether the subject is smiling. The camera will release the shutter automatically the moment it determines the subject is smiling. •“0 Auto” flashes on the monitor screen while smile detection is in progress. Indicator: The indicator color changes from red to green when the camera is getting ready to release the shutter. Snapshot Tutorial 31 To change Auto Shutter trigger sensitivity (Sensitivity) 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the fourth Control Panel option from the top (Sensitivity). 3. Use [4] and [6] to select the sensitivity setting you want, and then press [SET]. • You can select any one of three sensitivity levels, from o (Lowest) to oe (Highest). • With the oe (Highest) setting, the auto shutter release is triggered relatively easily. Auto shutter release triggering becomes more difficult with the o (Lowest) setting, but recorded images have the least blur. Experiment with Auto Shutter trigger sensitivity settings to find the one that work best for you. . Using Auto Shutter in Combination with Continuous Shutter The following describes how Auto Shutter works while used in combination with Continuous Shutter (page 39). With Normal Speed Continuous Shutter The camera will go back into Auto Shutter standby and be ready to shoot again each time it is triggered. To stop an ongoing Normal Speed Continuous Shutter operation, press [SET]. With High-speed Continuous Shutter 10 continuous shutter images will be shot when Auto Shutter is triggered. With Flash Continuous Shutter 3 continuous shutter images will be shot with flash when Auto Shutter is triggered. Snapshot Tutorial 32 Tips for Better Auto Shutter Snapshots • Using Auto Shutter in combination with Anti Shake (page 68) reduces the chance of image blur even more. • While recording with Detect Blur or Detect Smile, keep the camera as still as possible until the recording operation is complete. IMPORTANT! • If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again. • Detect Blur and Detect Panning may not produce the desired effect when shooting in an area where dim lighting requires a slow shutter speed, or when the subject is moving extremely quickly. • Since facial expressions differ from individual to individual, you may experience problems with getting the camera to release the shutter while Detect Smile is being used. If this happens, change the trigger sensitivity setting. • The Auto Power Off (page 133) trigger time is fixed at five minutes while the camera is in Auto Shutter standby. Sleep (page 133) is disabled while Auto Shutter being used. • To cancel Auto Shutter recording while Auto Shutter is being performed...