Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Good recording results are not possible when the camera is too far from the subject. • The (Audio) icon appears on the monitor screen after audio recording is complete. • You will not be able to record audio when remaining memory capacity is low. • You cannot add audio to the following types of images. — Movie images and the voice recording file icon — Images created with MOTION PRINT — Protected snapshot (page 161) • Audio that is re-recorded or deleted cannot be recovered. Make sure you no longer need audio before re-recording or deleting it. Microphone 153 PLAYBACK Playing Back a Voice Recording File Perform the following steps to play back a voice recording file. 1. In the PLAY mode, use [] and [] to display the voice recording file (a file with on it) you want to play. 2. Press [SET]. • This starts playback of the voice recording file through the camera’s speaker. • You can perform the following operations while audio is playing. IMPORTANT! • Audio volume can be adjusted only when playback is being performed or is paused. • If your recording has index marks (page 116) inside it, you can jump to the index mark before or after the current playback location by pausing playback and then pressing [] or []. Next, press [SET] to resume playback from the index mark position. To do this: Do this: Fast forward or fast reverse the audio Hold down [] or []. Pause and unpause audio playback Press [SET]. Adjust audio volume Press [] or []. Cancel playback Press [MENU]. 154 B PLAYBACK Displaying Camera Images on a TV Screen You can display recorded images on a TV screen. To display camera images on a TV, you need a television equipped with a video input terminal, USB cradle, and the AV cable that comes with the camera. 1. Connect one end of the AV cable that comes with the camera to the [AV OUT] port of the USB cradle, and the other end to the video input terminal of the TV. • Connect the yellow plug of the AV cable to the video input (yellow) terminal of the TV, and the white plug to the TV’s audio input (white) terminal. AV cable [AV OUT] (AV output port) Video input terminal TV 2. Turn off the camera. 3. Set the camera onto the USB cradle. 4. Turn on the TV and select its video input mode. 5. Now when you perform an image display operation on the camera, the image will appear on the TV screen instead of the camera’s monitor screen. 155 PLAYBACK IMPORTANT! • All icons and indicators that appear on the monitor screen also appear on the TV screen. • Note that the audio output is monaural. • The camera’s monitor screen will go blank during video output. • Pressing the USB cradle’s [PHOTO] button will activate the Photo Stand feature (page 149) and display images on the TV screen. • Depending on the size of the TV screen, recorded images may not fill the entire screen. • For video output, the audio volume level is initially set to maximum. Perform volume level adjustment using TV controls. • After using an optionally available AV cable (EMC2A) to connect the camera’s USB cradle connector directly to the AUDIO IN terminal of a TV, you can view recorded images on the TV and even use the TV screen to compose images before recording them. Selecting the Video Output System You can select either NTSC or PAL for the video output system to match the system of the TV you are using. 1. In a REC mode or the PLAY mode, press [MENU]. 2. Select the “Set Up” tab, select “Video Out”, and then press []. 3. Use [] and [] to select the setting you want, and then press [SET]. If you are using a TV designed for use in this area: Select this setting: U.S., Japan, and other areas that use the NTSC system NTSC Europe and other areas that use the PAL system PAL 156 B PLAYBACK IMPORTANT! • Images will not display properly if you select the wrong video output system. • This camera supports the NTSC and PAL video input systems only. Images will not display properly if you use a TV (monitor) that is designed for a different video input system. 157 B DELETING FILES You can delete a single file, or you can delete all files currently in memory. IMPORTANT! • Note that file deletion cannot be undone. Once you delete a file, it is gone. Make sure you really do not need a file anymore before you delete it. Especially when deleting all files, make sure you check all the files you have stored before proceeding. • A protected file cannot be deleted. To delete a protected file, unprotect it first (page 161). • Delete cannot be performed when all files in memory are protected (page 162). • Deleting an audio snapshot deletes both the image file and the audio file attached to it. • You cannot use the procedures in this section to delete images from the FAVORITE folder. See the procedures on page 165 for details about deleting FAVORITE folder contents. Deleting a Single File 1. In the PLAY mode, press [] ( ). 2. Use [] and [] to scroll through files and display the one you want to delete. 3. Use [] and [] to select “Delete”. • To exit the file delete operation...