Votos - 2, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
– While the camera is connected to a computer or other device – During a slideshow – During CS group playback – During movie recording and playback Specifying the Operation when the Monitor Screen is Tilted(Screen Tilt) Procedure [MENU] * “. SETTING” Tab * Screen Tilt Power On Turns on the camera whenever the monitor screen is tilted. On/Off Turns on the camera whenever the monitor screen is tilted, and turns it off when the monitor screen is returned to its normal position. Off No power on/off operation performed when the monitor screen is tilted or returned to its normal position. Other Settings (SETTING) 167 Configuring [p] Setting (PLAY) Configuring [p] Setting (PLAY) Procedure [MENU] * “. SETTING” Tab * PLAY Power On Camera turns on whenever [p] (PLAY) is pressed. On/Off Camera turns on or off whenever [p] (PLAY) is pressed. Off Camera does not turn on or off when [p] (PLAY) is pressed. • With “On/Off”, the camera turns off when you press [p] (PLAY) in the PLAY mode. Disabling File Deletion (Delete Key) Procedure [MENU] * “. SETTING” Tab * Delete Key The camera will not start the image delete operation when you press [2] ( ) while “Delete Key” is turned on. You can protect against accidental deletion of images by selecting “Disabled” for “Delete Key”. • Performing a format operation (page 172) will cause all images to be deleted, even if file deletion is disabled (“Disabled” selected for “Delete Key”) for some images. Configuring World Time Settings (World Time) Procedure [MENU] * “. SETTING” Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1. Use [8] and [2] to select “Destination” and then press [6]. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2. Use [8] and [2] to select “City” and then press [6]. • To change the “Destination” setting to summer time, use [8] and [2] to select “DST” and then select “On”. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months. Other Settings (SETTING) 168 3. Use [8] and [2] to select the geographic area you want and then press [SET]. 4. Use [8] and [2] to select the city you want and then press [SET]. 5. Press [SET]. IMPORTANT! • Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera. If it isn’t, select “Home” on the screen in step 1 and configure the Home City, date, and time settings as required (page 169). Setting the Camera’s Clock (Adjust) Procedure [MENU] * “. SETTING” Tab * Adjust When the date and time settings are what you want, select “Apply” and then press [SET] to apply them. [8] [2] Change the setting at the cursor location [4] [6] Move the cursor between settings • To switch between 12-hour and 24-hour timekeeping, use move the cursor to “am (pm)” and “24h” (one of which will be displayed) and then use [8] and [2] to change the setting. • You can specify a date from 2001 to 2049. • Be sure to select your Home City (page 168) before setting the time and date. If you set the time and date while the wrong city is selected for your Home City, the times and dates of all of the World Time cities (page 168) will be wrong. Other Settings (SETTING) 169 Specifying the Date Style (Date Style) Specifying the Date Style (Date Style) Procedure [MENU] * “. SETTING” Tab * Date Style You can select from among three different styles for the date. Example: July 10, 2015 YY/MM/DD 15/7/10 DD/MM/YY 10/7/15 MM/DD/YY 7/10/15 • This setting also affects the Control Panel date format as shown below (page 43). YY/MM/DD or MM/DD/YY: MM/DD DD/MM/YY: DD/MM Specifying the Display Language (Language) Procedure [MENU] * “. SETTING” Tab * Language . Specify the display language you want. 1Select the bottom tab “.”. 1 23 2Select “Language”. 3Select the language you want. • Camera models sold in certain geographic areas may not support display language selection. Other Settings (SETTING) 170 Configuring USB Protocol Settings (USB) Configuring USB Protocol Settings (USB) Procedure [MENU] * “. SETTING” Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device. Mass Storage Select this setting when connecting to a computer (pages 149, 154). With this setting, the computer sees the camera as an external storage device. Use this setting for normal transfer of images from the camera to a computer. PictBridge Select this setting when connecting to a printer that supports PictBridge (page 141). Selecting the Screen Aspect Ratio and Video Output System (Video Out) Procedure [MENU] * “. SETTING” Tab * Video Out You can use the procedure in this section to select either NTSC or PAL as the video output syst...