Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) • Auto Power Off is disabled under any of the following conditions. – While the camera is connected to a computer or other device – During a slideshow – During “E Tracking” – During Voice Recording playback or recording – During movie recording and playback Other Settings (Set Up) 111 Configuring [r] and [p] Settings (REC/PLAY) Configuring [r] and [p] Settings (REC/PLAY) Procedure [SET] * MENU * Set Up Tab * REC/PLAY Power On Camera turns on whenever [r] (REC) or [p] (PLAY) is pressed. Power On/Off Camera turns on or off whenever [r] (REC) or [p] (PLAY) is pressed. Disable Camera does not turn on or off whenever [r] (REC) or [p] (PLAY) is pressed. • With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC mode or [p] (PLAY) in the PLAY mode. • Change this setting to anything besides “Disable” before connecting to a TV for image viewing. Disabling File Deletion (U Disabled) Procedure [SET] * MENU * Set Up Tab * U Disabled The camera will not start the image delete operation when you press [ ] (Delete) while “U Disabled” is turned on. You can protect against accidental deletion of images by selecting “On” for “U Disabled”. • Performing a format operation (page 114) will cause all images to be deleted, even if file deletion is disabled (“On” selected for “U Disabled”) for some images. Other Settings (Set Up) B 112 Configuring USB Protocol Settings (USB) Configuring USB Protocol Settings (USB) Procedure [SET] * MENU * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device. Mass Storage Select this setting when connecting to a computer (pages 87, 97). With this setting, the computer sees the camera as an external storage device. Use this setting for normal transfer of images from the camera to a computer. PTP (PictBridge) Select this setting when connecting to a printer that supports PictBridge (page 80). This setting simplifies the transfer of image data to the connected device. Selecting the Screen Aspect Ratio and Video Output System (Video Out) Procedure [SET] * MENU * Set Up Tab * Video Out You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9. NTSC Video system used in Japan, the U.S., and other countries PAL Video system used in Europe and other areas 4:3 Normal TV screen aspect ratio 16:9 Wide screen aspect ratio • Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. Images will not display correctly if you select the wrong aspect ratio. • Images will not display correctly unless the camera’s video signal output setting matches the video signal system of the TV or other video equipment. • Images cannot be displayed correctly on a TV or video equipment that is not NTSC or PAL. • An optionally available AV cable (EMC-4A) is required for video output. Other Settings (Set Up) 113 Formatting Built-in Memory or a Memory Card (Format) Formatting Built-in Memory or a Memory Card (Format) Procedure [SET] * MENU * Set Up Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all contents on the memory card or in built-in memory. It cannot be undone. Make sure you do not need any data currently on the card or in built-in memory before you format it. • Formatting built-in memory will delete the following data. – Protected images – Startup screen • Formatting a memory card will delete the following data. – Protected images • Formatting will cause all images to be deleted, even if file deletion is disabled (“On” selected for “U Disabled” (page 112)) for some images. • Make sure the camera’s battery is sufficiently charged before starting a formatting operation. Formatting may not be performed correctly and the camera may stop operating normally if the camera powers down while formatting is in progress. • Never open the battery cover while formatting is in progress. Doing so can cause the camera to stop operating normally. Resetting the Camera to Factory Defaults (Reset) Procedure [SET] * MENU * Set Up Tab * Reset See page 127 for details about the camera’s factory default settings. The settings below are not reset. World Time settings, clock settings, date style, screen language, video output Other Settings (Set Up) B 114 Appendix Precautions during Use . Avoid Use While In Motion • Never use the camera to record or play back images while operating an automobile or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident. . Directly Viewing the Sun or Bright Light • Never look at the sun or any other bright light through the cameras viewfinder. Doing so can damage you...