Votos - , Puntuación media:
(
)
)
Fabricar: Casio
Tamaño del archivo: 3.01 mb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Otros manuales para este modelo:
Resumen del manual
• Normally, files are stored in built-in flash memory. When you insert a memory card, however, the camera automatically stores files to the card. • Note that you cannot save files to built-in memory while a memory card is installed in the camera. IMPORTANT! • Make sure you turn off the camera before inserting or removing a memory card. • Be sure to orient the card correctly when inserting it. Never try to force a memory card into the slot when you feel resistance. • See the instructions that come with the memory card for information about how to use it. • Certain types of cards can slow down processing speeds. • SD memory cards have a write protect switch, which you can use to protect against accidental deletion of image data. Note, however, that if you write protect an SD memory card, you must remove write protection whenever you want to record to it, format it, or delete any of its files. 104 USING A MEMORY CARD 105 To remove a memory card from the camera 1. Open the memory card cover. 2. Press the memory card into the camera and then release it. This will cause the card to come part way out of the camera. 3. Pull the memory card out of the slot. IMPORTANT! • Never insert any other object besides a memory card into the camera’s card slot. Doing so creates the risk of damage to the camera and card. • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your dealer or nearest CASIO service center. • Never remove a card from the camera while the green operation lamp is flashing. Doing so can cause the file save operation to fail, and even damage the memory card. Using a Memory Card To insert a memory card into the camera 1. Open the memory card cover. 2. Positioning the memory card so its cut off corner is oriented as shown in the illustration, push the memory card into slot as far as it will go. 3. Close the memory card cover. Cut off corner USING A MEMORY CARD Formatting a Memory Card Formatting a memory card deletes any data already stored on it. IMPORTANT! • Be sure to use the camera to format a memory card. Formatting a memory card on a computer and then using it in the camera can slow down data processing by the camera. In the case of an SD card, formatting on a computer can result in nonconformity with the SD format, causing problems with compatibility, operation, etc. • Note that data deleted by a memory card format operation cannot be recovered. Check to make sure you do not need any of the data on the memory card before you format it. • Formatting a memory card that contains files deletes all the files, even those that are protected (page 92). 1. Load the memory card into the camera. 2. Turn on the camera. Next, enter a recording mode or the Play Mode, and then press MENU. 3. Select the “Set Up” tab, select “Format,” and then press [ ]. 4. Select “Format,” and then press SET. • To exit the format operation without formatting, select “Cancel.” 106 USING A MEMORY CARD Memory Card Precautions • Use only an SD memory card or a MultiMedia Card with this camera. Proper operation is not guaranteed when any other type of card is used. • Electrostatic charge, electrical noise, and other phenomena can cause data to become corrupted or even lost. Always make sure that you always back up important data on other media (MO disc, computer hard disk, etc.) • If a memory card starts to behave abnormally, you can restore normal operation by reformatting it. However, we recommend that you always take along more than one memory card whenever using the camera far away from the home or office. • We recommend that you format a memory card before using it for the first time after purchasing it, or whenever the card you are using seems to be the cause of abnormal images. • Before starting a format operation, connect the AC adaptor for power or check to make sure that the battery is at full charge. Power interruption during the format operation can result in improper formatting, and even damage the memory card and make it unusable. Copying Files Use the procedures below to copy files between built-in memory and a memory card. You can copy all files from built-in memory to a memory card, or you can copy a single file from the memory card to built-in memory. To copy all the files in built-in memory to a memory card 1. Load the memory card into the camera. 2. Turn on the camera. Next, enter the Play Mode, and then press MENU. 3. Select the “PLAY” tab, select “Copy,” and then press [ ]. 107 USING A MEMORY CARD 4. Use [ ] and [ ] to select “Built-in Card,” and then press SET. • This starts the copy operation and displays the message “Busy.... Please wait...” • After the copy operation is complete, the monitor screen shows the last file in the folder. To copy a file from a memory card to built-in memory 1. Perform steps 1 through 3 of the procedure under “To copy all the files in built-in memory to a memory card.” 2. Use [ ] and [ ] to select “Card Built-...
Otros modelos de este manual:- ()