Votos - 2, Puntuación media: 3.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
l G The G icon (white) is displayed to show that white balance and exposure have been locked at the values set with the first shot. All pictures taken in a panorama series have the same exposure and white balance settings. 111111 Selecting Scene Scene 37 Anti-shake Mode Shooting in Anti-shake Mode For anti-shake mode, press F when the camera is in the auto mode, scene mode, movie mode and one-touch portrait mode. Anti-shake mode reduces the effects of camera shake and blurred subjects, and produces clear images. This mode reduces blur when shooting subjects in motion. Use it to freeze wildflowers swaying in the wind, or combine it with the zoom to capture a person’s natural expression. • When this mode detects camera shake, [VR] (vibration reduction) (c100) and [BSS] (best shot selector) (c82) are enabled. VR compensates blurred images. • The higher sensitivity is set and the shutter speed will be faster than in L (auto) mode. • Flash mode and self-timer are set to off. 1 Press F. The camera enters anti-shake mode. Press again to return to the shooting mode selected with the mode ON Anti-shake Mode selector. 2 Frame the subject and take the picture. While the shutter-release button is held down, the camera takes a maximum of ten shots. They are then compared and the sharpest picture (the picture with highest level of detail) is saved. 121212 j Notes on Anti-shake Mode • Shutter speed is limited to a certain value for dark subjects. • Pictures taken in this mode may become somewhat grainy. • Even if [Date imprint] (c98) is enabled, the date will not be imprinted. j BSS BSS may not produce the desired results if the subject moves or the composition changes while the shutter-release button is pressed all the way down. l Image Mode in Anti-shake Mode When m is pressed in anti-shake mode, the menu is displayed to enable set the image mode (c77). Changes made to these settings apply to all shooting modes. 38 One-Touch Portrait Mode Taking Pictures in the One-Touch Portrait Mode For portrait shots, press A when the camera is in the auto mode, scene mode, movie mode and anti-shake mode. The following features are automatically activated: • Portrait: Portrait subjects stand out clearly. • Face-priority AF: The camera automatically detects and focuses on faces. • Auto red-eye reduction: Reduces “red-eye” caused by the flash (c24). Macro close-up is not available in one-touch portrait mode. Press A again to return to the shooting mode selected in the shooting- mode selection menu. 1 Press A. •The K guide is displayed. ON/ 2 Frame a picture using the K guide. • When the camera detects a face, the guide is displayed with a double yellow border. • When the camera detects more than one face, the closest face is framed by a double border and the rest by a single border. The camera focuses on the face framed by the double border and adjusts exposure accordingly. If the camera loses its ability to detect a face (for example, because the subject has looked away from the camera), borders are no longer displayed and monitor display returns to that shown in step 1. One-Touch Mode 3 Press the shutter-release button halfway. • Focus and exposure are set, and the double border turns green. 4 Press the shutter-release button the rest of the way down to take a picture. 39 The One-Touch Portrait Menu Press m in one-touch portrait mode to display the one-touch portrait menu. In addition to image mode, portrait effects (reducing vividness of skin tones, softening overall image) can be set. Z Set up Display the setup menu (c91). Z Image mode Choose an image mode (c77). B Portrait effect Choose from [Normal], [Brighter] (brightens skin tones), and [Softer] (softens the overall image). Applying Portrait Effect 1 Press m in the one-touch portrait mode. • The one-touch portrait menu is displayed. WT One-Touch Portrait Mode 2 Press the multi selector G or H to choose [Portrait effect] and press d. • The options available for [Portrait effect] are displayed. • For information on using the multi selector, see “Multi Selector” (c8). MENU Exit ? One-touch portrait Set up Image mode Portrait effect 3 Press G or H to choose the option and press d. • The setting is applied and the one-touch portrait menu is displayed. • Press m to return the one-touch portrait menu without applying the setting. Po r t rait effect Normal Brighter Softer MENU Exit B 40 The One-Touch Portrait Menu j Face-Priority AF • The camera’s ability to detect faces depends on a variety of factors, including whether or not the subject is facing the camera. • The camera will focus continuously until a face detected. • If the yellow double border blinks when the shutter-release button is pressed halfway, the camera was unable to focus. Release the button and try again. • If no face is recognized when the shutter-release button is pressed halfway, the camera focus is on the center of the frame. • The camera may be unable to detect faces in the following situations; -When faces are pa...