Votos - 2, Puntuación media: 3.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
The battery can then be removed by hand (2). • The camera, battery, or memory card may be hot immediately after using the camera. Observe caution when removing the battery or memory card. B Notes on the Battery • Be sure to read and follow the warnings for the battery on page iii and the section, “The Battery” (A 195), before use. • If the battery will not be used for an extended period, recharge it at least once every six months and run it flat before returning it to storage. 15 Charging the Battery Charge the supplied Rechargeable Li-ion Battery EN-EL12 inserted into the camera, by connecting the supplied Charging AC Adapter EH-69P to the camera via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter into an electrical outlet. 1 Prepare the Charging AC Adapter EH-69P. If a plug adapter* is included, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product. * The shape of the plug adapter varies according to the country or region in which the camera was purchased. The Charging AC Adapter comes with the plug adapter attached in Argentina and Korea. 2 Insert the battery (A14). Do not turn the camera on. 3 Use the supplied USB cable to connect the Charging AC Adapter to the camera. Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable. USB cable First Steps 16 Charging the Battery 4 Plug the Charging AC Adapter into an electrical outlet. The charge lamp slowly blinks green to indicate that the battery is charging. About 3 hours and 50 minutes are required to charge a fully exhausted battery. The following chart explains charge lamp status when the camera is plugged into the electrical outlet. First Steps Charge lamp Description Blinks slowly (green) Battery charging. Off Battery not charging. When charging is complete, the charge lamp stops blinking green and turns off. Flickers (green) • The ambient temperature is not suited to charging. Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F). • The USB cable or Charging AC Adapter is not properly connected, or there is a problem with the battery. Disconnect the USB cable or unplug the Charging AC Adapter and correctly connect it again, or change the battery. 5 Disconnect the Charging AC Adapter from the electrical outlet and then disconnect the USB cable. 17 Charging the Battery First Steps B Notes on Charging AC Adapter • The Charging AC Adapter EH-69P is for use only with compatible devices. Do not use with another make or model of device. • Be sure to read and follow the warnings for the Charging AC Adapter on page iii and the section, “The Battery” (A 195), before use. • The EH-69P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other countries, use a plug adapter (commercially available) as necessary. For more information about plug adapters, consult your travel agency. • The Charging AC Adapter EH-69P is for charging the battery inserted into the camera. When the camera is connected to an electrical outlet with the Charging AC Adapter EH-69P, the camera cannot be turned on. • Do not, under any circumstances, use another make or model of USB-AC adapter other than Charging AC Adapter EH-69P. Failure to observe this precaution could result in overheating or in damage to the camera. C AC Power Source • If the AC Adapter EH-62F (available separately; A 197) is used, power is supplied to the camera from an electrical outlet and taking pictures and playing back images are available with this camera. • Do not, under any circumstances, use another make or model of AC adapter other than EH-62F. Failure to observe this precaution could result in overheating or in damage to the camera. D Charging Using Computer or Battery Charger • Connecting the COOLPIX S9100 to a computer also charges the Rechargeable Li-ion Battery ENEL12 (A 157, 187). • The EN-EL12 can be charged without using the camera by using the Battery Charger MH-65 (available separately; A 197). 18 Charging the Battery Turning On and Off the Camera Press the power switch to turn on the camera. The power-on lamp (green) will light, and then the monitor will turn on (the power-on lamp turns off when the monitor turns on). To turn off the camera, press the power switch again. When the camera is turned off, the power-on lamp and the monitor will turn off. • If the camera is turned off, hold down the c button to turn the camera on in playback mode (A 30). C Power Saving Function (Auto Off) If no operations are performed for a while, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will blink. If no operations are performed for another three minutes, the camera will turn off automatically. When the power-on lamp is blink...