Votos - 1, Puntuación media: 5
(
)
)
|
Fotos y especificaciones Nikon COOLPIX L27 |
Otros manuales para este modelo:
Resumen del manual
B Notes About EN-MH1 Rechargeable Batteries and Battery Charger MH-70/71 • You can also use EN-MH1 Ni-MH rechargeable batteries with this camera. • Use only Battery Charger MH-70 or MH-71 to charge EN-MH1 batteries. • When using Battery Charger MH-70 or MH-71, only charge EN-MH1 batteries. • Set the Battery type setting (A 83, E61) to COOLPIX (Ni-MH). Technical Notes and Index F4 B Notes About Rechargeable Ni-MH Batteries • If you repeatedly charge rechargeable Ni-MH batteries while they still have some charge remaining, the message Battery exhausted. may be displayed prematurely when using the batteries. This is due to the “memory effect,” in which the amount of charge the batteries can hold decreases temporarily. Use the batteries until there is no charge remaining and they will return to their normal behavior. • Rechargeable Ni-MH batteries discharge even when not being used. We recommend charging the batteries just before using them. B Cold Environment Usage Battery performance decreases in cold environments. When using the camera in cold environments, try not to let the camera and batteries become too cold. The camera may not function if you use discharged batteries in cold environments. Keep spare batteries warm and alternate between two sets of batteries. Batteries that cannot be used because they have become too cold can often be used again when they have been warmed up. B Battery Terminals Dirt on the battery terminals can prevent the camera from functioning. Remove dirt from the terminals using a dry cloth. B Remaining Battery Charge If you insert discharged batteries into the camera, the camera may indicate that the batteries have adequate charge remaining. This is a characteristic of batteries. B Recycling Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations. Cover the battery terminals with plastic tape when recycling. Technical Notes and Index F5 Memory Cards • Use only Secure Digital memory cards. Approved memory cards . F18 • Observe the precautions noted in the documentation included with your memory card. • Do not affix labels or stickers to the memory card. • Do not format the memory card using a computer. • Before using a memory card with this camera, format the card using this camera if the card has been used with another device. Before using a new memory card, we recommend using this camera to format the card. • Note that formatting a memory card permanently deletes all images and other data on the memory card. If there is data saved on the memory card that you wish to keep, copy that data to a computer before formatting. • If the message Card is not formatted. Format card? is displayed when you insert a memory card, the memory card must be formatted. If there is data on the memory card that you do not want to delete, select No. Copy that data to a computer before formatting. To format the memory card, select Yes and then press the k button. • Observe the following precautions while formatting the memory card, saving and deleting images, and copying images to a computer, otherwise data or the memory card itself may be damaged. - Do not open the battery-chamber/memory card slot cover or remove the memory card or batteries. -Do not turn off the camera -Do not disconnect the AC adapter Technical Notes and Index F6 Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. Lens When cleaning the lens, avoid touching it directly with your fingers. Remove dust or lint with a blower. To remove fingerprints, oil, or other grime that cannot be removed with a blower, wipe the lens with a soft, dry cloth or an eyeglass cleaning cloth, using a gentle spiral motion that starts in the center and moves toward the edges. Do not wipe forcefully or wipe with a rough cloth, otherwise the camera may be damaged or malfunction. If you still cannot remove the grime, wet a soft cloth with a commercial liquid lens cleaner and gently wipe off the grime. Monitor Remove dust or lint with a blower. To remove fingerprints, oil, or other grime, wipe the area with a soft, dry cloth or an eyeglass cleaning cloth. Do not wipe forcefully or wipe with a rough cloth, otherwise the camera may be damaged or malfunction. Body • Remove dust or lint with a blower. Wipe with a soft, dry cloth. • After using the camera at the beach or other sandy or dusty environment, wipe off any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry thoroughly. Note that foreign matter inside the camera could cause damage not covered by the warranty. Storage Remove the batteries if the camera will not be used for an extended period. To prevent mold or malfunction and to ensure long, trouble-free use of the camera, we recommend you insert the batteries and operate the camera approx. once a month. Do not store the camera with naphtha or camphor moth balls, or in any of the following locations: • Next to equipment that produces strong electr...