Votos - 0, Puntuación media: 0
(
)
)
|
Fotos y especificaciones Olympus FE-5040 |
Otros manuales para este modelo:
Resumen del manual
Selects the operating sound and volume of the camera buttons (except the shutter button). Selects the type and volume of the shutter sound. Adjusts the warning sound volume. Adjusts the image playback volume. *1 Even when [SILENT MODE] is [ON], FGcan be used to adjust volume during playback. *2 Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television. 42 EN For information on using the menus, see “Using the Menu” (p. 4). For information on using the menus, see “Using the Menu” (p. 4). Adjusting the CCD and the image processing function [PIXELMAPPING] s(Settings 2) .. PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the Hbutton when [START] (Submenu 2) is displayed. . The camera checks and adjusts the CCD and the image processing function at the same time. Adjusting the brightness of the monitor [s ss] ]] s(Settings 2) • s Submenu 2 Application Selects the monitor brightness BRIGHT/ depending on the surrounding NORMAL brightness. EN 43 Selecting a video signal system to match your TV [VIDEO OUT] s(Settings 2) .. VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Application NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. PAL Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. T o play back camera images on a TV 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Multi-connector 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. 4 Press the q button, and use HIto select the image for playback. Depending on the TV’s settings, the displayed images and information may become cropped. 44 EN For information on using the menus, see “Using the Menu” (p. 4). For information on using the menus, see “Using the Menu” (p. 4). Saving battery power between shots [POWER SAVE] s(Settings 2) .. POWER SAVE Submenu 2 Application OFF Cancels [POWER SAVE]. When the camera is not being used ON for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button. Changing the display language [W WW] ]] s(Settings 2) • W Submenu 2 Application Languages The language for the menus and error messages displayed on the monitor is selected. 1 Use FGHIto select your language and press the Hbutton. Setting the date and time [X XX] ]] s(Settings 2) • X To select the date display order 1 Press Iafter setting Minute, and use FGto select the date display order. Date order OKMENU “Date, time, time zone, and language” (p. 17) EN 45 Switching between home and travel destination time zones [WORLD TIME] s(Settings 2) .. WORLD TIME You will not be able to select a time zone using [WORLD TIME] if the camera clock has not first been set using [X]. Submenu 2 Submenu 3 Application HOME/ALTERNATE x*1 z*1, 2 x The time in the home time zone (the time zone selected for xin submenu 2). z — — The time in the travel destination time zone (the time selected for zin submenu 2). Select the home time zone (x). Select the travel destination time zone (z). *1 In areas where daylight saving time is in effect, use FGto turn daylight saving time ([SUMMER]) on. *2 When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (z). 46 EN P r i nPrinting P r i nPrinting Direct printing (PictBridge*1) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer’s instruction manual. Printing images at the printer’s standard settings [EASY PRINT] In the setup menu...