Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. . We recommend that you take test shots to get accustomed to your camera before taking important photographs. . In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. Checking the contents of the box or Digital camera Strap Lithium Ion Battery (LI-90B) USB-AC adapter (F-2AC) USB cable (CB-USB8) OLYMPUS Setup CD-ROM Stylus pen Other accessories not shown: Warranty card Contents may vary depending on purchase location. Names of Parts 6 5 8 7 1 Strap eyelet 2 Connector cover 3 Multi-connector 4 HDMI micro connector 5 Self-timer lamp/ AF illuminator 6 Flash 7 Lens 8 Speaker 9 Tripod socket 10 Battery/card cover 11 Battery/card cover lock 9 10 11 3 2 1 4 2 EN 4 1 Stereo microphone 2 Flash switch 5 3 Monitor 4 Zoom lever 6 5 Shutter button 7 6 Mode dial 7 nbutton 8 8 Indicator lamp 9 Fbutton (shooting movies) 10 Abutton (OK) 11 Arrow pad 9 INFO (changing information display) # (flash) 10 Y (self-timer) 11 .(erase) 12 q button (switching between 12 shooting and playback) 13 .button 13 Arrow pad F(up) H(left) I(right) G(down) FGHIinstruct to press the up/down/left/right arrow pad. 2 1 3 Attaching the camera strap Pull the strap tight so that it does not come loose. EN3 Inserting and removing the battery and card (commercially available) 1 Follow Steps 1 and 2 to openthe battery/card cover. Battery/card cover 21 Battery/card cover lock Turn off the camera before opening the battery/ card cover. 2 Insert the battery while sliding thebattery lock knob in the directionof the arrow. Battery lock knob Insert the battery as illustrated with the Cmark toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. 3 Insert the card straight until itclicks into place. Write-protect switch Always use SD/SDHC/SDXC/Eye-Fi/FlashAir (with Wireless LAN function) card with this camera. Do not insert other types of memory cards. “Using the card” (p. 73) . Do not touch the metallic parts of the card directly. 4 EN To remove the card 1 2 Press the card in until it clicks and comes out slightly, then remove the card. 4 Follow Steps 1 and 2 to close the battery/card cover. 12 When using the camera, be sure to close and lock the battery/card cover. Charging the battery Connect the USB cable and USB-AC adapter to the camera and charge the battery. For charging the battery abroad, see “Using your charger and USB-AC adapter abroad” (p. 72). . The battery is not fully charged at shipment. Before use, be sure to charge the battery until the indicator lamp turns off (up to 4 hours). Connecting the camera Indicator lamp On: Charging Off: Charged AC outlet USB cable (supplied) Connector cover Multi-connector EN 5 When to charge the batteries . The battery can be charged while the camera is connected to the computer via USB. The charging Charge the battery when the error message shown time varies depending on the performance of the below appears. computer. (There may be cases in which it takes Error message approx. 10 hours.) Battery Empty Flashes in red Never use any cable other than supplied or Olympus-designated USB cable. This may cause smoking or burning. The included F-2AC USB-AC adapter (hereafter referred to as USB-AC adapter) differs depending on the region where you purchased the camera. If you received a plug-in type USBAC adapter, plug it directly into AC outlet. The included USB-AC adapter has been designed to be used for charging and playback. Do not take pictures while the USB-AC adapter is connected to the camera. Be sure to unplug the power plug of the USB-AC adapter from the wall outlet when the charging is complete or the playback ends. For details on the battery, see “Battery Handling Precautions” (p. 80). For details on the USB-AC adapter, see “USB-AC adapter” (p. 81). . If the indicator lamp does not light, check the USB cable and USB-AC adapter connections. 6 EN Turning on the camera and making the initial settings When you turn on the camera for the first time, a screen appears enabling to set the language for the menus and messages displayed in the monitor, and the date and time. To change the selected date and time, see “Setting the date and time d [X]” (p. 50). 1 Press the nbutton to turn on the camera, press FGHI of the arrow pad to select yourlanguage and press the Abutton. 2 Press FGof the arrow pad toselect the year for [Y]. XMENUBack Y/M/D Y M D Time :..2013 Date and time setting screen 3 Press Iof the arrow pad to savethe setting for [Y]. 4 As in Steps 2 and 3, pressFGHIof the arrow pad toset [M] (month), [D] (day), [Time] (hours and minutes), and [...
Otros modelos de este manual:Cámaras - SH‑50 (2.13 mb)