Iniciar sesión:
Votos - 0, Puntuación media: 0 ( )

Manual de usuario Sony, modelo DSC-TX10

Fabricar: Sony
Tamaño del archivo: 3.57 mb
Nombre del archivo:
Idioma del manual:ruuken
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:
Cámaras - DSC-TX10 (336.69 kb)en
Cámaras - DSC-TX10 (19.49 mb)plsvhritentresfrdenlhuptskdaficsro

Resumen del manual


• The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: GB (CIPA: Camera & Imaging Products Association) 14 – [Panel Brightness] is set to [3] – – – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies applies shooting under the following conditions: – Movie quality: AVCHD HQ – When continuous shooting ends because of set limits (page 24), press the MOVIE (Movie) button again and continue shooting. Shooting functions such as the zoom do not operate. GB x Supplying power The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied). You can import images to a computer without worrying about wearing down the battery pack by connecting the camera to a computer using the multi-use terminal USB cable. Notes • Power cannot be supplied when the battery pack is not inserted in the camera. • Power supply from the wall outlet (wall socket) is available only when the camera is in playback mode or when a connection is made between the camera and a computer. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. • If you connect the camera and a computer using the multi-use terminal USB cable when the camera is in playback mode, the display on the camera is changed from the playback screen to the USB connection screen. Press (Playback) button to switch to the playback screen. GB 15 Inserting a memory card (sold separately) Ensure the notched corner faces correctly. Inserting a memory card (sold separately) Ensure the notched corner faces correctly. 1 Open the cover. 2 Insert the memory card (sold separately). • With the notched corner facing as illustrated, insert the memory card until it clicks into place. 3 Close the cover securely, so that the yellow mark under the slide lock is hidden. • Closing the cover with the battery inserted incorrectly may damage the camera. x Memory cards that you can use Memory card For still images For movies A Memory Stick PRO Duo a a (Mark2 only) Memory Stick PRO-HG Duo a a Memory Stick Duo a — SD memory card a a (Class 4 or faster) B SDHC memory card a a (Class 4 or faster) SDXC memory card a a (Class 4 or faster) • In this manual, products in A are collectively referred to as “Memory Stick Duo” media, and products in B are collectively referred to as SD card. GB x To remove the memory card/battery pack x To remove the memory card/battery pack . Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note • Never remove the memory card/battery pack when the access lamp (page 11) is lit. This may cause damage to data in the memory card/internal memory. GB Setting the clock ON/OFF (Power) Lens cover 1 Lower the lens cover. The camera is turned on. The power lamp lights up only when the camera starts up. • You can also turn on the camera by pressing the ON/OFF (Power) button. • It may take time for the power to turn on and allow operation. 2 Select a desired language. 3 Select the desired area following the instructions on the screen, then touch [Next]. 4 Set [Daylight Savings] or [Summer Time], [Date & Time Format] and [Date & Time], then touch [Next]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 5 Touch [OK]. GB 6 6 7 When an [In-Camera Guide] introductory message is appeared on the screen, touch [OK]. 8 Read the waterproof precautions, then touch [OK]. Shooting still images/movies Shooting still images Shutter button MOVIE (Movie) button 1 Press the shutter button halfway down to focus. When the image is in focus, a beep sounds and the z indicator lights. 2 Press the shutter button fully down. Shooting movies 1 Press the MOVIE (Movie) button to start recording. • Use the W/T (zoom) lever to change the zoom scale. 2 Press the MOVIE button again to stop recording. GB Notes Notes The sound of the lens and lever operating will be recorded when the zoom function operates while shooting a movie. The sound of the MOVIE button operating may also be recorded when movie recording is finished. • Continuous shooting is possible for approximately 29 minutes at one time at the camera’s default settings and when the temperature is approximately 25°C (77°F). When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop to protect the camera depending on the ambient temperature. GB Viewing images 1Press the (Playback) button. (Playback) • When images on a memory card recorded with other cameras are played back on this camera, the registration screen for the data file appears. x Selecting next/previous image Touch (Next)/ (Previous) on the screen. • To play back movies, touch (Playback) in the cent...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría