Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The power level range (e.g. 1/1 t1/2) corresponds to the aperture range (e.g. F4 t5.6). Applications 45 Multiple flash (MULTI) The flash is triggered a number of times while the shutter is open (multiple flash). Multiple flash allows motion of the subject to be captured in a photograph for later analysis. • The camera must be set to the M mode for multiple flash photography. Multiple flash can only be used if the camera supports the M mode. 1 Set the camera to the M mode. 2 Press the mode button to display of the data panel. 3 Press the select button to blink “Hz.” • The current multiple flash frequency (flashes per second) is displayed on the data panel. 4 Press the + or – button to select the flash frequency. • The flash frequency may be selected from the following. 100, 50, 40, 30, 20, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 • Keep the + or – button pressed down to repeatedly change the value. Applications Continued on the next page 47 5 Press the select button to blink “TIMES.” • The current number of flashes for multiple flash is displayed on the data panel. 6 Press the + or – button to select the number of flashes. • The number of flashes may be selected from the following. - -, 40, 35, 30, 25, 20, 15, 10, 9, 8, 7, 6, 5, 4, 3, 2 • Keep the + or – button pressed down to repeatedly change the value. • When “--” is selected, flashes continue at the set frequency while the shutter is open. 7 Press the select button to blink “LEVEL” on the data panel. • The current power level is displayed. 8 Press the + or – button to select the power level to set. • The power level may be selected from the following. 1/8, 1/16, 1/32 9 Press the select button. 10Set the shutter speed and aperture. • The shutter speed is calculated as follows to suit the selected flash frequency and number of flashes. Number of flashes (TIME) . Flash frequency (Hz) . Shutter speed For example, when ten flashes and 5 Hz are selected, 10 . 5 = 2 requires a shutter speed of longer than two seconds. 11 When the flash is fully charged, press the shutter button to take the photo. • The distance at which the proper exposure is obtained with a single flash is displayed on the data panel. • To prevent shaking, the use of a tripod is recommended during multiple flash photography. • Test flash will flash at the selected frequency/number/level while the test-flash button is being pressed if the selection switch is at or HOLD. • The use of custom settings allows the camera to be set up for manual flash photography without selecting the M mode (p. 54). Applications Continued on the next page 49 Maximum number of continuous flashes The maximum number of continuous flashes during multiple flash photography is limited by the charge in the battery. Use the following values as a guide. With alkaline batteries Power Flash frequency (Hz) level 100 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1/8 3 4 4 4 5 5 5 5 5 6 6 7 7 7 10 1/16 5 6 7 8 8 9 9 10 10 10 10 10 15 20 40 1/32 10 10 10 15 15 20 20 20 25 30 40 40* 40* 40* 40* With nickel-metal hydride batteries (When using 1550 mAh) Power Flash frequency (Hz) level 100 50 40 30 20 10 9 8 7 6 5 4 3 2 1 1/8 3 4 4 4 5 5 5 5 5 6 6 7 7 10 20 1/16 5 6 7 8 8 9 9 10 10 10 10 15 20 40 40* 1/32 10 15 15 15 15 20 25 25 30 40 40* 40* 40* 40* 40* *40 signifies more than 40. • The maximum number of flashes varies with the type of battery and its condition. If the external battery adaptor FA-EB1AM (optional) is used, the maximum number of flashes increases beyond the values given above. Reset to default settings Press the + and - buttons together for three seconds. Most flash functions return to default settings. Item Default settings Page Flash on/off On (Auto on or on) 13 Flash coverage (zoom) Auto zoom (85 mm) 19 Flash mode (TTL/M/MULTI) TTL 32 High speed sync (HSS) On 35 Wireless flash (WL) Off 37 Ratio control (RATIO)* Off – Power level in TTL/M (LEVEL) 1/1 44 Power level in multiple flash (LEVEL) 1/32 49 Frequency in multiple flash (Hz) 5 47 Repetition in multiple flash (TIMES) 10 48 * This indicator is displayed, but this function is not available. Custom setting is not reset. 51 Applications Custom setting The various flash settings may be changed as necessary. The following five items may be changed. • Wireless channel setting (channels 1 to 4) • Flash range units (m/ft) • Time to auto power off (4 minutes/15 minutes/60 minutes/none) • Time to auto power off when using wireless flash (60 minutes/none) • Recording modes in which manual flash and multiple flash may be set (M mode only/all modes) 1 Press the select button for 3 seconds. • The first item (wireless channel setting) is displayed. 2 Press the select button to select the item, and press the + or – button to select the desired setting. • Each time the select button is pressed, the above five items appear on the data panel (see following page). 53 Applications 1. Wireless channel setting Channel 1 Channel 2 m ft 60 minutes none M mode only All modes Channel 3 Channel 4 4 minutes 15 min...