Votos - 4, Puntuación media: 4.8
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
2 500 Approx. 150 LCD screen OFF Approx. 3 000 Approx. 180 *2) Recording under the following conditions: — The image size is set to 640x480 — Flash mode is set to® (No flash) — The image quality is set to [STANDARD] — Recording continuously approximately every four seconds Still image playback*3) NP-FM50 supplied) Number of images Battery life (min.) LCD screen ON Approx. 5 000 Approx. 270 *3) Playing back single images recorded at 640x480 image size in order at about 3-second intervals Moving image recording*^ NP-FM50 supplied) LCD screen ON (min.) LCD screen OFF (min.) Continuous recording Approx. 170 Approx. 210 *4) Recording with the image size set to 160x112. Notes • The battery life and number of images will be decreased if you use your camera at low temperatures, use the flash, repeatedly turn the power on/off or use the zoom. • “—” appears in the display window until the battery usable time is calculated. • During charging, the indicators in the display window may not appear correctly or may flash in the following cases. — When the battery pack is not installed correctly. — When the AC power adaptor is disconnected. — When the battery pack has malfunctioned. • When you turn the LCD screen on and off, it takes about one minute for the correct battery remaining time to appear. • If sufficient battery remaining time is indicated but the power runs out soon, fully charge the battery so that the correct battery remaining time appears. • Do not short the DC plug of the AC power adaptor with a metallic object, as this may cause malfunction. 13 Getting started Using the AC power adaptor o Open the DC IN jack cover and connect the DC connecting cable to the DC IN jack of your camera with the ▲ mark facing up. 2 Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (mains). Using a car battery Use Sony DC adaptor/charger (not supplied). When using the AC power adaptor Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from the wall outlet. 14 Setting the date and time When you first use your camera, set the date and time. If these are not set, the CLOCK SET screen appears whenever you turn on your camera. 1 Set the mode dial to O, S, A, M, SCN, ► , or . 2 Slide the POWER switch in the direction of the arrow to turn on the power. The POWER lamp (green) lights up. The CLOCK SET screen appears on the LCD screen. To change the date and time, set the mode dial to SET UP (page 81) and perform the procedure from step ©. 3 Select the desired date display format with V/V on the control button, then press the center Select from [Y/M/D] (year/month/day), [M/D/Y] (month/day/year) or [D/M/Y] (day/month/year). WMTl/TTlfW CLOCK SET M / D M / D D / M CANCEL CLOCK SET 2001 l/fTI/TT! H2|:[oo ■Y/M/D M / D / Y D / M / Y 1 OK CANCEL ■ OK 15 Getting started 4 Select the year, month, day, hour or minute item you want to set with b/B on the control button. The item to be set is indicated with A/V. 5 Set the numeric value with A/V on the control button, then press the center • to enter it. After entering the number, A/V moves to the next item. If you selected [D/M/Y] in step G, set the time on a 24-hour cycle. Select [OK] with B on the control button, then press the center Oat the desired moment to begin clock movement. The date and time are entered. To cancel the date and time setting Select [CANCEL] with A/V/b/B on the control button, then press the center Z. Note If the rechargeable button battery is ever fully discharged (page 84), the CLOCK SET screen will appear again. When this happens, reset the date and time, by starting from step G above. CLOCK SET ■Y/M/D M / D / Y 20011/ 71/ 4| |10|:|30| | OK PM ■ OK CLOCK SET ■Y/M/D M / D / Y 20011/ 1|/ 1|| 12|:|00| | OK - AM_ [cancel • OK 16 Inserting the "Memory Stick" 1 Open the battery/“Memory Stick” cover. Slide the cover in the direction of the arrow. 2 Insert the “Memory Stick.” Insert the “Memory Stick” with the ► mark facing toward the battery compartment as illustrated until it clicks. 3 Close the battery/“Memory Stick” cover. Removing the “Memory Stick” Open the battery/“Memory Stick” cover, then press the “Memory Stick” once lightly. Notes • Insert the “Memory Stick” firmly until it clicks, otherwise a message such as “MEMORY STICK ERROR” will be displayed. • Never remove the “Memory Stick” or turn off the power while the access lamp is lit up. • You cannot record or edit images on a “Memory Stick” if the erasure prevention switch is set to the LOCK position. Connector Label space The position and shape of the erasure prevention switch may differ depending on the types of “Memory Stick” used. 17 Getting started Basic operations ► Recording Basic operations How to use the mode dial The mode dial switches the function which is used for recording, playback, or editing. Set the dial as follows before start...
Otros modelos de este manual:Cámaras - DSC-S75 (1.48 mb)