Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
(Auto) When the Face Detection function is activated, the flash strobes automatically to reduce the red-eye phenomenon. (On) The flash always strobes to reduce the red-eye phenomenon. (Off) Does not use Red Eye Reduction. • To avoid blurring of images, hold the camera firmly until the shutter is released. It usually takes a second after you press the shutter button. Be also sure not to allow the subject to move during this period. • Red-eye reduction may not produce the desired effects. It depends on individual differences and conditions, such as distance to the subject, or if the subject looked away from the pre-strobe. In such a case, you can correct the red-eye using [Retouch] in the viewing menu after shooting (page 50). • When the Face Detection function is not used, the flash will not strobe to reduce red-eye phenomenon even when [Auto] is selected. Shooting menu For details on the operation 1 page 34 Color Mode: Changing the vividness of the image or adding special effects You can change the brightness of the image, accompanied by effects. (Normal) Sets the image to standard color. (Sepia) Sets the image to sepia color. (B & W) Sets the image to black and white. (Setup): Changing Setup items See page 55. Using the menu For details on the operation 1 page 34 Viewing menu The default settings are marked with . (Slideshow): Playing back a series of images Plays back recorded images in order (Slideshow). Image This setting is fixed to [Folder] if “Memory Stick Duo” media (sold separately) is not inserted. All Plays back all the still images in order. Folder Plays back the still images in the selected folder. Effects Simple A simple slideshow switching still images at a preset interval • The playback interval is adjustable. This effect allows you to enjoy your images at your own set pace. Basic A basic slideshow suitable for a wide range of scenes Other Settings Interval 1 sec Sets the display interval of images for a [Simple] slideshow. 3 sec 5 sec 10 sec Auto The interval is set to suit [Basic] slideshow. Repeat On Plays back images in a continuous loop. Off After all the images have been played back, the slideshow ends. Viewing menu For details on the operation 1 page 34 Start See the following procedure. Exit Cancels the slideshow. 1 Select [Image], [Effects], [Interval] and [Repeat] with v/V/b/B on the control button. 2 Select [Start] with v, then press z. The slideshow starts. To end the slideshow Press z. • You cannot pause the slideshow. Using the menu Viewing menu For details on the operation 1 page 34 (Retouch): Retouching still images Adds effects or makes corrections to a recorded image and records it as a new file. The original image is retained. To retouch the still images 1 Select the images you want to retouch while displaying in single-image. 2 Press the MENU button. 3 Select [Retouch] with v/V on the control button, then press z after selecting the desired mode with b/B. 4 Retouch the images following the instructions for each retouching mode below. (Trimming) Playback zoom is performed on the image and part of the image is cropped. 1 Press W/T to zoom in on the trimming range. 2 Set the point with v/V/b/B, then press the MENU button. 3 Select [Image Size] with v/V, then press z. Select an image size to record with v/V, then press z again. 4 Select [OK] with v/V, then press z. • The image size that you can trim may vary depending on the image. • The quality of trimmed images may deteriorate. (Red Eye Correction) Corrects the red-eye phenomenon caused by flash. Select [OK] with v/V, then press z. • You may not be able to correct the red-eye phenomenon depending on the image. Viewing menu For details on the operation 1 page 34 (Multi Purpose Resize): Changing the image size according to usage You can change the aspect ratio and size of the shooting images, then record them as the new files. You can convert images to the 16:9 aspect ratio for high definition viewing and to the VGA size for blog or e-mail attachments. Changes the aspect ratio from 4:3/3:2 to 16:9 and saves as 2M size. (HDTV) Changes the aspect ratio from 16:9/3:2 to 4:3 and saves as VGA size. (Blog/E-mail) 1 Select the images you want to retouch while displaying in single-image. 2 Press the MENU button. 3 Select the [Multi-Purpose Resize] with v/V on the control button, then press z after selecting the desired size of the image with b/B. 4 Press W/T to zoom in from the area you want to trim. 5 Set the point with v/V/b/B, then press the MENU button. 6 Select [OK] with v, then press z. • For details about the image size, see page 25. • You cannot resize movies. • You cannot resize the images from VGA to [HDTV]. • Enlarging the image and multi resizing can reduce the image quality. Using the menu Viewing menu For details on the operation 1 page 34 (Protect): Preventing accidental erasure Protects images against accidental erasure. The (Protect) indicator appears on a protected image. (This Image) Protects/unlocks the currently ...
Otros modelos de este manual:Cámaras - DSC-S950 (1.88 mb)