Votos - 4, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• When shooting with a flash in other than [Flash] mode, [White Balance] is set to [Auto]. • When flash is [On] or [Slow Synchro], the white balance can only be adjusted to [Auto], [Flash], [One Push], or [One Push Set]. • [One Push Set] is unable to be selected while charging the flash. 54GB To capture the basic white color in [One Push Set] mode 1 Frame a white object such as a piece of paper filling the screen under the same lighting conditions as you will shoot the subject. 2 MENU t (White Balance) t [One Push Set] t z on the control button The screen momentarily turns black, and when the white balance has been adjusted and stored in the memory, the recording screen is displayed again. Notes • If the indicator flashes while shooting, the white balance is either not set or cannot be set. Use automatic white balance. • Do not shake or strike the camera while [One Push Set] is in progress. • When flash mode is set to [On] or [Slow Synchro], the white balance is adjusted to the condition with the flash emitting. • The white references loaded using [White Balance] and [Underwater White Balance] are stored separately (DSC-W350/W360/W380/W390 only). zEffects of lighting conditions The apparent color of the subject is affected by the lighting conditions. The color tones are adjusted automatically, but you can adjust color tones manually using the White Balance function. Weather/lighting Daylight Cloudy Fluorescent Incandescent Characteristics of light White (standard) Bluish Green-tinged Reddish Table of contents Operation Search MENU/Search Index 55GB contents Operation Search MENU/Search Index Underwater White Balance (DSC-W350/W360/W380/W390 only) Adjusts the color tone when the camera is set to (Underwater) mode in Scene Selection or (Underwater) for movies. 1MENU t (Underwater White Balance) t desired mode • Depending on the color of the water, the Underwater White Balance may not work correctly even though you select [Underwater 1] or [Underwater 2]. • When flash is [On], the underwater white balance can only be adjusted to [Auto], [One Push], or [One Push Set]. • [One Push Set] is unable to be selected while charging the flash. • The white references loaded using [White Balance] and [Underwater White Balance] are stored (Auto) Automatically adjusts color tones underwater so they appear natural. (Underwater 1) Adjusts for underwater conditions where blue is strong. (Underwater 2) Adjusts for underwater conditions where green is strong. (One Push) Adjusts the white balance depending on the light source. The white color memorized in [One Push Set] mode becomes the basic white color. Use this mode when [Auto] or other modes cannot be set the color properly. (One Push Set) Memorizes the basic white color which will be used in [One Push] mode (page 55). Notes separately. 56GB contents Operation Search MENU/Search Index Focus You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode. AF stands for “Auto Focus,” a function that adjusts the focus automatically. 1 MENU t (Focus) t desired mode (Multi AF) Focuses on a subject in all ranges of the finder frame automatically. When you press the shutter button halfway down in still image shooting mode, a green frame is displayed around the area that is in focus. • When the Face Detection function is active, AF operates with priority on faces. • When Scene Selection is set to (Underwater) mode (DSC-W350/ W360/W380/W390 only), focus operation is suited to underwater shooting. When focus is achieved by half-pressing the shutter button, a large frame is displayed in green. AF range finder frame (Center AF) Focuses on a subject in the center of the finder frame automatically. Using the AF lock function together, you can compose the image the way you want. AF range finder frame (Spot AF) Focuses on an extremely small subject or a narrow area automatically. Using the AF lock function together, you can compose the image the way you want. Hold the camera steady so as not to misalign the subject and the AF range finder frame. AF range finder frame Notes • When you use [Digital Zoom] or [AF Illuminator], the AF range finder frame is disabled and appears in a dotted line. In this case, the camera works to focus on the subjects at the center of the screen. • When the focus mode is set to other than [Multi AF], you cannot use the Face Detection function. • The focus mode is fixed to [Multi AF] in the following situations: – In Intelligent Auto Adjustment – In Easy shooting mode – In Movie Mode – When the Smile Shutter function is activated – When the self-timer is set to [Self-portrait One Person] or [Self-portrait Two People] 57GB Continued r contents Operation Search MENU/Search Index zFocusing on subjects near the edge of the screen If the subject is out of focus, do as follows: 1Recompose the shot so that the subject is centered in the AF range finder, and press the shutter button halfway to focus on the subject (AF lock). 2Wh...
Otros modelos de este manual:Cámaras - DSC-W350 (1.97 mb)
Cámaras - DSC-W350D (1.97 mb)
Cámaras - DSC-W360 (1.97 mb)
Cámaras - DSC-W380 (1.97 mb)