Iniciar sesión:
Votos - 4, Puntuación media: 4.3 ( )

Manual de usuario Sony, modelo DPF-V700

Fabricar: Sony
Tamaño del archivo: 3.3 mb
Nombre del archivo: 3300208151.pdf
Idioma del manual:en
Fotos y especificaciones  Sony  DPF-V700
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:
Marcos - DPF-V700 (3.32 mb)de
Marcos - DPF-V700 (3.31 mb)es
Marcos - DPF-V700 (3.34 mb)ru
Marcos - DPF-V700 (822.91 kb)bg

Resumen del manual


Or, delete any unnecessary images. (.page 33) • Is the internal memory full? c Delete any unnecessary images. (.page 33) • Did you save images from a computer to the internal memory without making a folder in the internal memory? c If you do not make a folder, you can only save up to 512 images. In addition, the number of images may reduce depending on the file name length or character type. When you save images to the internal memory on a computer, be sure to make a folder in the internal memory and save images in this folder. Cannot delete an image. • Is the memory card write- protected? c Use the device you are using to cancel write-protection and try deleting again. • Is the write-protect switch of the memory card in the [LOCK] position? c Slide the write-protect switch to the enable position. • Are you using “Memory Stick-ROM”? c It is not possible to delete an image from or format “Memory Stick-ROM”. 46 GB Symptom Check item Cause/Solutions An image was deleted accidentally. — c An image cannot be recovered once it is deleted. Connecting a digital camera or other external device Symptom Check item Cause/Solutions The camera is connected but nothing is displayed. • Is the cable connected properly? c Connect the cable properly. • Is the photo frame turned on? c Turn the photo frame on. Nothing happens even if the USB cable is disconnected and then connected. — c An over current error may have occurred with the photo frame. To recover from the error, turn the power of the photo frame off and then back on. Images are not displayed on the TV screen or LCD screen. • The input of the TV is set to the external input. c Even if the input of the TV is not set to the photo frame, images may sometimes not be displayed on the TV screen or LCD screen if an HDMI cable is connected. c Change the input of the TV to the photo frame, or disconnect the HDMI cable and switch the display to the LCD screen. Photo frame Symptom Check item Cause/Solutions Nothing happens even if you operate the photo frame. — c Push reset switch on rear side of the photo frame by thin object such as a pin, etc. Remote control Symptom Check item Cause/Solutions Nothing happens even if you operate the remote control. • Is the battery inserted in the remote control properly? c Replace a new battery. (.page 16) c Insert a battery. (.page 16) c Insert a battery in proper orientation. (.page 16) — c Point the top end of the remote control towards the remote sensor on the photo frame. (.page 16) c Remove any obstruction between the remote control and remote sensor. Troubleshooting 47 GB Additional information Additional information while connected to the wall outlet via the AC Precautions adaptor. On safety • Be careful not to set or drop any heavy objects on the power cord, or to damage the power cord in any way. Never operate this photo frame with a damaged power cord. • Should any solid object or liquid fall into the cabinet, unplug the photo frame and have it checked by qualified personnel before operating it any further. • Never disassemble the photo frame. • To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. • When the photo frame is not going to be used for an extended period of time, disconnect the power cord from the wall outlet. • Do not handle the photo frame roughly. • To reduce the risk of electrical shock, always unplug the photo frame from the electrical outlet before cleaning and servicing the photo frame. On installation • Avoid placing the photo frame in a location subject to: – vibration –humidity – excessive dust – direct sunlight – extremely high or low temperatures • Do not use electrical equipment near the photo frame. The photo frame will not work properly in electromagnetic fields. • Do not place heavy objects on the photo frame. • Be sure to use the AC adaptor supplied with the photo frame. Do not use other AC adaptors, as this may cause a malfunction. • Do not use the supplied AC adaptor for other devices. • Do not use an electrical transformer (travel converter), as this may cause overheating or a malfunction. • In case the cord of the AC adaptor is damaged, do not use it any longer, as this may be dangerous. On moisture condensation If the photo frame is brought directly from a cold location to a warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the photo frame will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, unplug the AC power cord of the photo frame and do not use the photo frame for at least one hour. On transport When you transport the photo frame, remove the memory card, external devices, AC adaptor and connected cables from the photo frame and put the photo frame and its peripherals in the original box with the protective packaging. If you no longer have the original box and packing parts, use similar packing material so that the photo frame w...

Otros modelos de este manual:
Marcos - DPF-V900 (3.3 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría