Votos - 2, Puntuación media: 3.5
(
)
)
|
Fotos y especificaciones Sony DPF-E72 |
Otros manuales para este modelo:
Resumen del manual
K Access lamp L “Memory Stick PRO” (Standard/ Duo)/SD memory card/MMC/xD- Picture Card slot (.page 22) M VIEW MODE button (.page 23) N Holes for hanging unit on the wall (.page 16) O Space for storing stand 12 GB Remote control Remote control A VIEW MODE button (.page 23) B SLIDE-SHOW ( ) button (.page 23) C INDEX ( ) button (.page 23) D SINGLE ( ) button (.page 23) E MENU button F BACK button G 1 (on/standby) button H CLOCK ( ) button (.page 23) I Zoom in ( )/Zoom out ( ) buttons (.page 40) J ALBUM ( ) button (.page 32) K Direction (B/b/v/V) buttons L (enter) button M ROTATE ( ) button (.page 40) Before operation 13 GB Basic operations Basic operations The supplied lithium battery (CR2025) has already been inserted into the remote control. Pull out the protective sheet before use as shown in the figure. Protective sheet Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame. Remote sensor Note The photo frame may fall if you use the buttons on the photo frame when it is hanging on the wall. Operate the photo frame using the remote control. Replacing the battery of the remote control If the remote control stops working, replace the battery (CR2025 lithium battery) with a new one. 1 Pull out the battery holder. While pressing in the tab of the battery holder, pull out the battery holder. 2 Remove the old battery from the battery holder and then insert a new battery. Insert the battery so that “+” is facing upwards. 3 Reinsert the battery holder into the remote control. WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Notes • When the lithium battery becomes weak, the operating distance of the Remote control may shorten, or the Remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion. 14 GB • • • Dispose of used batteries as specified by the local authorities. • Do not leave the remote control in a very hot and humid place. • Take care that no foreign objects get inside the remote control when you, for example, replace the battery. • Incorrect use of the battery may cause leaking and corrosion. – Do not recharge the battery. – When the remote control will not be used for a long period of time, remove the battery from the remote control to prevent leaking and corrosion. – Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it into a fire may cause the battery to rupture or leak. About descriptions in this manual The operations described in this manual are based on remote control operation. When an operation is performed differently, for example, with the remote control and the buttons on the photo frame, it will be explained in a tip. Setting the stand 1 Hold the photo frame tightly and insert the stand straight into the screw hole on the rear panel. 2 Screw the stand into the screw hole firmly until the stand stops turning. Setting to portrait or landscape orientation You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand. Basic operations Continued 15 GB When the photo frame is placed in the portrait orientation, the image is also automatically rotated to its proper orientation. When the photo frame is placed in the portrait orientation, the image is also automatically rotated to its proper orientation. Notes • Check whether the stand is stable. If the stand is not set properly, the photo frame may fall over. • DPF-A72/D72 only: When the photo frame is placed in the portrait orientation, the Sony logo doesn't light up. • The photo frame does not detect and rotate the orientation of images when [Auto display orientation] of [General Settings] on the (Settings) tab is set to [OFF]. • A magnet is contained in the storage portion of the stand. Do not keep anything that is easily affected by magnetism, such as a cash card or credit card, near the photo frame. If you place the photo frame near a cathode-ray tube television, the colors of the television screen may be affected. Tip It is easier to turn the stand if you wind or wrap a rubber band tightly around the stand when you remove the stand from the photo frame. To display the photo frame on the wall You can hang the photo frame on the wall using the following procedure. 1 Prepare screws (not supplied) suitable for the screw holes on the rear panel. 4mm (3/16 inch) More than 25mm (1 inch) 4.2mm (3/16 inch) 8.6mm (11/32 inch) Holes for hanging the unit on the wall 2 Screw the screws (not supplied) into the wall. Be sure the screws (not supplied) protrude between 2.5 to 3mm (1/8 inch) from the surface of the wall. Between 2.5mm to 3mm (1/8 inch) 3 Hang the photo frame on the wall by fitting the one hole on the rear panel to the screws on the wall. Notes • Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of...
Otros modelos de este manual:Marcos - DPF-A72 (5.61 mb)
Marcos - DPF-D72 (5.61 mb)