Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Entire image* Displays an entire image enlarged to proper size. (An image may be displayed with margins on the top, bottom, left and right.) Fit to screen Zooms in at the center of the image enough to fill the whole screen. Note An image may not display with the display size you set on the menu, depending on the style of the slideshow. Advanced operations 31 GB Refresh mode Refresh mode Due to one of the characteristics of the device, images stored for a long time or read many times may be subject to data error when read too often. This photo frame refreshes the internal memory automatically to prevent these errors, depending on the status of the internal memory. The confirmation screen used for refreshing the internal memory is displayed automatically when the refresh is needed. The refresh starts when you select [OK]. The Refresh also starts automatically when no operation is attempted for 30 seconds. If you select [Cancel], the confirmation screen used for refreshing the internal memory is displayed the next time. Do not turn the photo frame to OFF while the internal memory is being refreshed. It may cause a malfunction. It may take approximately 5 minutes to refresh the internal memory. Notes • We recommend that you perform a backup of your data periodically to avoid losing it. • Do not run a slideshow with less than 10 images continuously if you have set the interval time for the slideshow to 3 seconds. You may not be able to protect some images in the internal memory. Adding images to the internal memory You can use the photo frame as a digital album, saving important images in the internal memory. Tip In [Image file size] of the menu, you can preset whether to optimize the size of images or save images as is, without compressing them, when you save them to the internal memory (page 46). When [Image file size] is set to [Album], up to approx. 2,000 images (DPF-D72N), or approx. 250 images (DPF-A72N/E72N) can be added to the album. When set to [Original], the number of images that can be saved may vary, depending on the original image file size. 1 Press (Album) when an image stored on the memory card is displayed on the screen. Tip Select [Add to album] using v/V after pressing the MENU button and then select (Editing) using B/b. Single image display 32 GB Slideshow display Refer to “Searching for an image Index image display 2 Press v/V to select [Add this image], [Selected images] or [Add all images] and then press . If you select [Add this image], the image currently displayed is added to the album. Go to step 4. (This item cannot be selected on the slideshow display.) If you select [Selected images], you can select the image you want to add from the image list. Go to step 3. If you select [Add all images], the image list is displayed. A check mark is attached to the check box of all the images. Go to step 4. 3 Specify the image to add from the image list. About image searching in the image list (DPF-D72N only) During a search: Displays all the images applicable to the criteria used for the search. Other than during a search: Displays all images in the device displayed on the screen. (Filtering) (DPF-D72N only)” (page 39). 1Press B/b/v/V to select the image to add to the album and then press . A check mark will be attached to the check box of each selected image. Repeat this operation to add multiple images at the same time. To cancel the selection, select images to cancel and then press to delete the check mark in the check box. 2Press MENU. The confirmation screen used for selecting a folder is displayed. 4 Press v/V to select the folder you want and press . The confirmation screen used to decide whether to add an image or not to the internal memory is displayed. Tip A new folder is created automatically when you select [New folder]. 5 Press v/V to select [Yes] and then press . The image is saved in the specified folder in internal memory. Continued 33 GB Advanced operations 6 6 when the confirmation screen is displayed. Notes • Images in the internal memory cannot be added to the album. • Avoid doing the following while images are being added to the album of the internal memory. Doing so may damage the photo frame, memory card, or the data: – Turning off the power – Removing an memory card – Inserting another card Tips • To perform this operation using the remote control, press the MENU button on the remote control and then press v/V to select [Add to album] from (Editing) and then press . • You can also use the MENU button on the photo frame. • You can change the thumbnail size using [ / ] in the image list. • Due to one of the characteristics of the internal memory device, images stored for long time or read many times may be subject to data error when read too often. We recommend that you perform a backup of your data periodically to avoid losing it. • If you add many images in Album size at a time, it may take a long time. Exporting an image You can export the images in the internal memory to...
Otros modelos de este manual:Marcos - DPF-A72N (5.32 mb)
Marcos - DPF-D72N (5.32 mb)