Votos - 5, Puntuación media: 4 ( )

Fabricar: Sony Tamaño del archivo: 3.64 mb Nombre del archivo: Idioma del manual:

Fotos y especificaciones  Sony  DPF-C700

Hole on the rear panel 4 mm (3/16 inch) More than 25 mm (1 inch) ф5 mm (7/32 inch) 10 mm (13/32 inch) 2 Drive the screws (commercially available) into the wall. Make sure the screws protrude 2.5 mm to 3 mm (approx. 1/8 inch) from the surface of the wall. 2.5 mm – 3 mm (1/8 inch) Approx. 3 Hang the photo frame on the wall by fitting the screw head through the hole on the rear of the unit. . . Use screws suited for the wall material. The screws may be damaged, depending on the type of material used in the wall. Drive the screws to the stud in the wall or a pillar. . Firmly tighten the screws to prevent the photo frame from falling. . When you want to reinsert the memory card, remove the photo frame from the wall, then eject and reinsert the memory card while the photo frame is lying on a stable surface. . Remove the stand before hanging the photo frame on the wall. . Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then plug the AC adaptor to the wall outlet. . Sony takes no responsibility for any accidents or damage caused by improper attachment, misuse, natural disasters, etc. . While the photo frame is mounted on the wall, it may fall if you use buttons on it. Support it carefully so as not to drop it. . Turning on the photo frame Connecting the AC adaptor Connect the AC adaptor as illustrated below. The photo frame is automatically turned on. To the DC IN connector To a wall outlet When using the photo frame for the first time .Proceed to “.Setting up the photo frame”. If you have not operated the photo frame for an extended period of time, the demonstration display begins. If the initial settings have been already made .Proceed to “Let’s Use the Photo Frame”. Turning on/off the photo frame To turn the photo frame on Press .(on/standby). To turn the photo frame off Hold .(on/standby) pressed until the power is turned off. . . Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut off the power by unplugging the AC adaptor from the wall outlet. . If you will not be using the photo frame for a long time, press .(on/standby) to turn the unit off after use, then disconnect the AC adaptor from the DC IN jack on the unit and unplug the AC adaptor from the wall outlet. . Do not short-circuit the plug of the AC adaptor with a metal object. Doing so may cause a malfunction. . Do not use the AC adaptor placed in a narrow space, such as between a wall and furniture. . Do not disconnect the AC adaptor from the photo frame while the photo frame is on. Doing so may damage the photo frame. . The supplied AC adaptor is for exclusive use with this photo frame. It cannot be used with other equipment. . Setting up the photo frame Before using the photo frame for the first time, make the initial settings, following the instructions on the screen. The settings can be changed later. 1 Press [MENU]. The initial...

Descargar ahora

Introduzca dos números de la imagen: