Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Lid Handle 2. Air Outlet Vent 3. Glass Lid 4. Power “ON” Indicator Light 5. Temperature Ready Light 6. Temperature Control Knob 7. Control Panel 8. Heating Element 9. Glass Oil Container 10. Main Housing 11. Basket Handle 12. Frying Basket 13. Guide Rails 14. Moisture Container 15. Magnetic Power Cord 16. Magnetic Power Cord Socket 17. Reset Button Technical Specifications Voltage: 120V., 60Hz. Power: 1800 Watts Oil Capacity: 3 Liters OPERATING INSTRUCTIONS 7 Detachable Magnetic Power Cord How to Reset the Dep Fryer Your Deep Fryer has been specifically designed with your safety in mind. Your deep fryer has a unique detachable power supply cord. This power supply cord cord is designed to from the fryer body in the event that the supply cord is inadvertently pulled. This is intended to prevent the of the appliance and hazardous spillage of hot oil. Warning: Always remove the plug from the wall socket before cleaning. Allow the deep fryer and the oil to cool completely ( approximately 2 hours) before cleaning. Never immerse the control panel, cord or plug in water or any other liquid. • Follow the cleaning instructions on page 3. (Before using for the First Time) • Never immerse the control panel, cord or plug in water or any other liquid. • Do not place the control panel, cord or plug in the dishwasher. • Clean the control panel only with a damp cloth. • The frying basket, glass lid with the filter can be washed in the dishwasher. • Wash the glass oil container with warm, soapy water. Do NOTplace in dishwasher. • The body of the deep fryer can be washed in warm soapy water. Do notput the body of the deep fryer in the dishwasher. • After washing the glass lid, make sure that it is free of any water. See illustration below for best position to drain water from the glass lid. • Any other servicing should be performed by EURO-PROOperating LLC. Cleaning Instructions If for some reason the deep fryer stops heating, the reason might be that the safety reset switch has been tripped. To re-set the deep fryer, follow the following instructions: 1. Turn the temperature control knob counter clockwise to the lowest heat setting. 2. Remove the plug from the electrical outlet. 3. Let the deep fryer cool for a minimum 15 minutes. 4. Replace the power cord into the electrical outlet. 5. Push the reset button located on the side of the control panel. (see illustration) 6. Reset the temperature control knob to the desired heat temperature and proceed with frying. ResetButton The female receptacle portion of the power supply cord is permanently attached to the rear of the the control panel. To connect the male power cord plug to the female receptacle on the appliance, orient the male plug so that it mates with the female receptacle. The male plug can only be inserted one way. If the male plug will not go into the receptacle on the appliance, rotate the male plug 180° IMPORTANT: Should the male plug become detached from the appliance during use, it is important to: 1. Unplug the power cord from the wall outlet. 2. Turn the temperature control knob to the lowest heat setting. 3. Re-attach the power cord to the appliance. 4. Re-connect to power outlet. 5. Turn the temperature control knob to the desired temperature setting. OPERATING INSTRUCTIONS Read all the sections of this booklet and follow all the instructions carefully. 3 OPERATING INSTRUCTIONS 6 Prior To First Use, Clean The Unit Thoroughly• All components with the exception of the electrical parts, can be washed in warm soapy water. Dry thoroughly before use. • Use basket handles to remove the frying basket. Always make sure the basket handle is securely attached to the basket. To attach the handle to the frying basket, insert the metal part of the handle inside the metal bracket on the frying basket. Lift the handle up over the basket to secure in place. (Fig. 1) • Lift the control panel with heating element out of its slots by pushing it up from the bottom with one hand while holding the body of the deep fryer with your other hand. • Remove the oil container. • Clean the oil container and the frying basket with hot water, dishwashing liquid or other non-poisonous detergent and non-abrasive sponge. Warning: Never immerse the control panel in water or any other liquids. Warning: All components must be completely dried before filling with oil or using. Special care must be taken to ensure the filter in the lid is completely dry, otherwise the filter will not function properly and may lead to steam being trapped within the fryer during use.Warning: Never exceed "MAX" line when filling the basket with food. Using for the First TimeWarning: Never plug in the control panel when it is not installed in the fryer body with heating element in the oil container. Do not immerse the control panel, cord or plug in water. Warning: This unit should not be used to boil water. Warning: Always let the fryer cool completely for 2 hours before taking it apart for cleaning. Never carry or move...