Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Customer Service Department directTelephone : 0844 844 4558 UK 1800 882 350 ROI Fax : 01325 302530 Safety If not used properly this product can be dangerous! This product can cause serious injury to the operatorand others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product. The operator is responsible for following the warning and safety instructionsin this manual and on the product. Explanation of Symbols on your product Do not use in the rain or leave the product out- Warning. doors while raining. The use of eye protection is recommended. Read the user instructions carefully to make sure you understand all the controls and what they do. General Power Tool Safety Warnings2) Electrical safety WARNING Read all safety warnings and all instruc-a) Power tool plugs must match the outlet. Never modify tions. Failure to follow the warnings and instructions the plug in any way. Do not use any adaptor plugs may result in electric shock, fire and/or serious injury. with earthed (grounded) power tools. Unmodified Save all warnings and instructions for future reference.plugs and matching outlets will reduce risk of electric The term ‘“power tool” in the warnings refers to your shock. mains-operated (corded) power tool or battery-operated b) Avoid body contact with earthed or grounded sur( cordless) power tool. faces, such as pipes, radiators, ranges and refrigera1) Work area safety tors. There is an increased risk of electric shock if a) Keep work area clean and well lit. Clutteredor dark your body is earthed or grounded. areas invite accidents. c) Do not expose power tools to rain or wet conditions. b) Do not operate power tools in explosive atmospheres,Water entering a power tool will increase the risk such as in the presence of flammable liquids, gases orelectric shock. dust. Power tools create sparks which may ignite the d) Do not abuse the cord. Never use the cord for carry- dust or fumes. ing, pulling or unplugging the power tool. Keep cord c) Keep children and bystanders away while operating aaway from heat, oil, sharp edges or moving parts. power tool. Distractions can cause you to lose con-Damaged or entangled cords increase the risk of electrol. tric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use commonsense when operating a power tool. Do not use a power tool while you are tired or under the influence ofdrugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personalinjuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power sourceand/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turningthe power tool on. A wrench or a key left attached to a rotating part of the power tools may result in personal injury. e) Do not overreach. Keep proper footing and balance atall times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away frommoving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn iton and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or thebattery pack from the power tool before making anyadjustments, changing accessories, or storing powertools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children anddo not allow persons unfamiliar with the power tool orthese instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts...