Votos - 3, Puntuación media: 4 ( )

Fabricar: Weed Eater Tamaño del archivo: 984.58 kb Nombre del archivo: Idioma del manual:

Clean oil or fuel spillage and remove any fuel- soaked debris. Allow machine to cool before storing. • If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting. • Never make any adjustments or repairs with the engine running. • Check grass catcher components and the discharge chute frequently and replace with manufacturer’s recommended parts, when necessary. • Mower blade is sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. • Check brake operation frequently. Adjust and service as required. • Maintain or replace safety and instruction labels, as necessary. CONGRATULATIONS on your purchase of a new Grass Catcher. It has been designed, en gi neered and manu fac tured to give you the best pos sible de penda bil ity and per form ance. Should you experience any prob lems you can not easily remedy, please contact your nearest au tho rized service center/ department. They have com pe tent, well trained tech ni cians and the proper tools to service or repair this unit. Please read and retain this manual. The in struc tions will enable you to assemble and main tain your Grass Catch er properly. Always observe the "SAFETY RULES". TABLE OF CONTENTS SAFETY RULES ................................................................... 2-3 CUSTOMER RESPONSIBILITIES ......................................... 11 ASSEMBLY ...........................................................................5-9 STORAGE .............................................................................. 11 OPERATION .......................................................................... 10 REPAIR PARTS ..................................................................... 12 3 4 NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the riding mower, in the operator's position. KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference. The op er a tion of any riding mower can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Al ways wear safety glass es or eye shields while op er at ing your riding mower or per form ing any ad just ments or repairs. We rec om mend a wide vi sion safe ty mask over spec ta cles or stan dard safety glass es. UNPACKING INSTRUCTIONS • Remove all parts and packing materials from carton. • Check carton contents against list. Be sure all parts are there. CARTON CONTENTS: (2) Containers (1) Upper Chute (1) Lower Chute (1) Blade (1) Support Assembly (1) Cover Assembly (1) Counterweight (1) Counterweight hardware WARNING Do not operate mower unless container is properlyissubject to wear and detierioration. Check bag frequently. Replace whencracked or damaged. Use only a recommended replacement container. WARNING FULL BAG INDICATOR GRASS CATCHER CONTAINERS LOWER CHUTE LOWER CHUTE ATTACHING STRAPS CHUTE LATCH COVER UPPER CHUTE PARTS IDENTIFICATION COMPLETE BAGGER MUST BE IN PLACE BEFORE OPERATING MOWER CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO RIDING MOWER: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift/motion control lever in "NEUTRAL" position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key "OFF" and remove key. • Make sure the blade and all moving parts have completely stopped. • Disconnect spark plug wire from plug and place where it cannot come in contact with plug. SUPPORT ASSEMBLY BLADE DRAWBAR COUNTERWEIGHT COUNTERWEIGHT HARDWARE (1) Drawbar (1) Deflector Guard (1) Deflector Guard Hardware (1) #7 Drill Bit DEFLECTOR GUARD 5 PULL OUT ON STOP BRACKET TO REMOVE SUPPORT ASSEMBLY TO REMOVE THE SUPPORT ASSEMBLY (See Fig. 2B) 1. Pull outward on the stop bracket enough to allow support assembly to be lifted up and away from drawbar. SHOULDER BOLTS SUPPORT ASSEMBLY REAR MOUNTING BRACKET (See Fig. 2A and 2B) NOTE: Your new drawbar already has four (4) shoulder bolts installed. Simply hang the mounting bracket on the bolts. REAR DRAWBAR 1 (See Fig. 1A, 1B) 2 Fig. 2A Fig. 1A Fig. 1B Fig. 2B 1. Remove existing drawbar by removing four screws. Insert flat screwdriver to remove bumper from engine plate. Lift up and pull rearward. 2. Install new drawbar by replacing screws removed in step 1. ASSEMBLY DRAWBAR DRAWBAR ENGINE PLATE 6 CONTAINER MOUNTING (See Fig. 4) 1. Install one container to left side first. Install other container to right side. NOTE: Left edge of right con tain er should always over lap right edge of left con tain er at center sup port. 2. Close cover and lock latch over center support tube. To lock and release latch, p...

Descargar ahora

Introduzca dos números de la imagen: