Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
We are pleased to recommend to you the MAKITA LAWN EDGER which is the rusult of a long developement programme and many years of knowledge and experience. Please read the booklet that refers to in detail the various points that will demonstrate its outstanding performance. This will assist you to obtain the best possible result from your MAKITA LAWN EDGER. CAUTION:_ •Always stop the engine when a blade jam occurs. • DO NOT attempt to remove an object causing a blade jam if the engine is running. Physical injury can occur if a blade jam is removed and the blade suddenly starts. • Keep a firm grip on the edger with both hands, the right hand on the rear handle, the left hand on the front handle. Use a firm grip with thumbs and fingers encircling the handles. A firm grip will help you keep control of the edger. •NEVER OPERATE the edger with only one hand. • Before edging, plan your direction of travel so that the until will always be positioned on your right side and so that you walk on hard surface whenever possible. •Never adjust blade height with engine running. SAFETY RULES AND PRECAUTIONS Proper safety precautions must be observed. Like all power equipment this unit must be handled carefully. DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these simple rules. 1. For safety and proper operation, read this instruction manual carefully and thoroughly, familiarize yourself with the unit before use. Failure to do so may result in serious injury to yourself or bystanders. 2. Children and young persons aged under 18 years must not be allowed to operate the stick edger. Persons over the age of 16 years may however use the devece for the purpose of being trained only whilst under supervision of a qualified trainer. 3. Do not operate the unit when fatigued or under the influence of alcohol or drugs. 4. Dress properly, do not wear loose clothing or jewelry that could become caught in moving parts of the unit. Wear proper protectors such as safety goggles, ear plugs, sturdy gloves, safety footwear, etc. 5. Keep the handles free of oil and fuel. 6. Do not smoke while mixing fuel or filling tank. 7. Do not mix fuel in an enclosed room or near open flames. 8. Always mix and store the fuel in a properly marked container that is approved for such usage. 9. When refueling, be sure to stop the engine and confirm that it is cooled down. Never refuel when the engine is running or hot. 10. Do not start the engine in the place of refueling. Move at least 3 m (10 feet) away from the place of refueling. 11. If fuel is spilled, be sure to wipe it up completely and properly dispose of those materials before starting the engine. 12. Never start or run the engine inside a closed room or building. Fumes from the exhaust contain dangerous carbon monoxide. 13. Inspect the entire unit for loosening, missing and damage of the parts (especially the cutter blade). Never use cracked, deformed or damaged cutter blade. 14. Do not operate the unit without the blade cover (guard) in place. 3 mete 2 360° V 5» 15. In startup or during operation, pay attention to anyone or any objects in working vicinity. Start the engine on a flat, clear surface. Operate the unit by yourself. 16. Inspect the area to be cut and remove all debris that could become entangled in the blade. Also remove any objects that the unit may sling during cutting. 17. Keep hands, feet, clothing, and the like well away from cutting member and moving parts. 18. Do not overreach. Keep proper footing and balance at all times. Do not run the unit standing on a ladder or any other unstable footing. Keep handles dry, clean, and free from oil and fuel. 19. Keep children away. Onlookers should be kept at a safe distance from the work area, at least 50 feet. 20. Do not use the unit on graveled surfaces. Never operate the unit without good visibility or light. Always push slowly over rough ground. 21. Objects struck by the cutting member can cause severe injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging. 22. Never direct discharge of material toward bystanders nor allow anyone near the area of operation. Use care in directing discharge to avoid glass enclosures, automobiles, and the like. 23. Use the unit only for edging the grass, lawn or weeds. 24. If the unit strikes a foreign object, stop the engine and disconnect the spark plug lead. Inspect for damage. Repair any damage before restarting and operating the unit. 25. Never attempt to make engine adjustments while the unit is running. Always make engine adjustments with the unit resting on a flat, clear surface. 26. Do not put the hot engine onto dry grass or combustible materials. 27. Stop the engine and disconnect the spark plug lead before replacing the cutter blade, adjusting or maintaining the unit. 28. Periodically clean and inspect the unit for loose parts (screws, bolts, nuts, etc.). Tighten them if necessary. 29. Do not use any...