Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
• Check for overhead clearances before driving under any objects. Do not allow roll bar to contact low overhanging obstacles such as tree branches and guide wires. • Never remove the roll bar from the vehicle. • Do not exceed the machine weight rating of the roll bar. • Read and follow all of the instructions shown below regarding the inspection and maintenance of the roll bar structure and the seat belt. WARNING Failure to properly inspect and maintain the ROLL BAR protective structure can cause serious injury or death. INSPECTION OF THE ROLL BAR PROTECTIVE STRUCTURE A ROLL BAR, like any other safety device, needs to be periodically inspected to verify that the integrity of the device has not been compromised through normal machine use, misuse, age degradation, modifications, or a roll over. To maintain operator roll over protection and roll bar effectiveness: • If a ROLL BAR becomes damaged for any reason, such as a collision, roll over or impact, the ROLL BAR must be replaced. Small undetectable cracks can reduce the effectiveness of the ROLL BAR. Never weld, straighten, or repair the ROLL BAR. • Never alter the ROLL BAR by welding anything to it or by drilling additional holes. • BEFORE FIRST TIME USE - Inspect the ROLL BAR structure and mounting hardware for: 1) Check to make sure the machine GVW (Gross Vehicle Weight), including attachments, restrained payload, fuel and operator, is not in excess of the maximum weight specified on the ROLL BAR label. 2) Make sure there isn’t any missing, damaged, or loose mounting hardware. 3) Make sure the ROLL BAR has been correctly and completely installed. • EVERY 100 HOURS - Inspect the ROLL BAR structure and mounting hardware for: 1) Any cracks in the structure (structural members and/or welds). 2) Significant corrosion on any part of the ROLL BAR structure or hardware. 3) Missing, damaged, or loose mounting hardware 4) Mounting hardware that is of a grade lesser than specified. 5) Machine GVW (Gross Vehicle Weight), including attachments, restrained payload, fuel and operator, in excess of the maximum weight specified on the ROLL BAR label. 6) Any modifications that have been made, such as unauthorized welds and holes. 7) Any permanent deformation or twisting of the ROLL BAR structure. 8) That the ROLL BAR label is still in place and is readable. 9) That the ROLL BAR on-product warning labels are still on the ROLL BAR and are readable. • If there is any doubt as to the condition of the ROLL BAR, remove the machine from service and contact your dealer for assistance. Safety 9 Safety Safety Rules & Information WARNING Failure to properly inspect and maintain the seat belt can cause serious injury or death. INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT • The seat belt like the ROLL BAR, needs to be periodically inspected to verify that the integrity has not been compromised through normal machine use, misuse, age degradation, modifications, or a roll over. If the seat belt does not pass all of the following tests, it should be replaced. • BEFORE EACH USE – Conduct the following inspections/maintenance of the seat belt and retraction mechanism: 1) Check for dirt or debris in the retraction mechanism. If dirt or debris is found, it should be removed. 2) Check to make sure the retraction mechanism retracts easily and completely. 3) Check for damage to any part of the seat belt such as nicks, cuts, loose stitching, or fraying. 4) Check that the buckle and latch operate properly and that the latch plate is not excessively worn, deformed, or the buckle is damaged or cracked. The seat belt should latch and release easily. INSPECT BUCKLE& LATCHINSPECT WEBBING 10 Identification Numbers Identification Numbers SSAAMMPPLLEE When contacting your authorized dealer for Identification Tag replacement parts, service, or information you MUST have these numbers. Record your part number, serial number and engine serial numbers in the space provided for easy access. These numbers can be found in the locations shown. NOTE:For location of engine identification numbers, refer to the engine owner’smanual. Safety 11 Safety Decals Safety SAFETY DECALS This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing. Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit. All DANGER, WARNING, CAUTION and instructional messages on your rider and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your rider and mower. If any of these decals are lost or damaged, rep...
Otros modelos de este manual:cortadoras de césped - 5900605 (3.52 mb)
cortadoras de césped - 5900606 (3.52 mb)
cortadoras de césped - 5900607 (3.52 mb)