Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
For portable units, which are used outdoors, we recommend to use a residual-current device having a residual-current rating . 30 mA. In Switzerland use of a residual- current device is obligatory. 12 Interruptions of work: Never leave the Electric Lawn Scarifier unattended at the working area. v If you interrupt your work store the unit in a safe place. Disconnect the mains plug! v When you interrupt work in order to go to another working area, always switch off the Electric Lawn Scarifier during transport. Put the wear compensation lever in the transport position. 3. Function If you come into contact with an obstruction during aerating: 1. Turn off the Electric Lawn Scarifier. 2. Remove the obstruction. 3. Check the Lawn Scarifier for damage and have it repaired if necessary. GB Correct aerating: 4. Assembly The Lawn Scarifier can be used for removing matting and moss in the lawn and thatch. To maintain a well-cared-for lawn we recommend aerating every 4 -6 weeks depending on the state of your lawn. v First of all, mow your lawn to the length you require. We particularly recommend this if the grass has grown tall (e.g.while you were away on holiday). Recommendation: the shorter you mow your lawn, the easier it is to aerate, thus lessening the strain on the Lawn Scarifier and increasing the lifetime of the aerator cylinder. Staying too long in one place with the machine running or scarifying when the ground is wet or too dry can damage the turf. v For good results, guide the Lawn Scarifier at an appropriate speed in strips as straight as possible across your lawn. To avoid leaving any gaps during aerating, the strips should touch. v Always guide the Lawn Scarifier at an even speed depending on the type of ground. v When working on inclines always stand diagonally to the incline in a sturdy, safe stance. Do not work on extremely steep slopes. Danger of tripping! To prevent tripping take particular care when moving backwards and when pulling the Lawn Scarifier. When aerating areas of very mossy lawn we recommend re-sowing the lawn after aerating. This helps the areas of lawn which were replaced by moss to regenerate quicker. V Do not place the connecting cable 8 under strainA during assembly. Assembling the handle: 1. Insert the two lower sections of the upright 5 (with the end with the round hole) in the mountings in the motor casing 6 and secure with the crosshead screws 9. 13 5. Operation 39651240873965124087 2. Insert the two locking bolts 1 from outside through the holes in the two central sections 2 of the upright and secure to the lower sections of the upright 5 with two wing nuts 4. 3. Screw the upper part of the upright with starting handle 3 to the central sections of the upright 2 with two more locking bolts 1 and the wing nuts 4. Thiscompletestheassemblyofthehanle. Warning: Fit the upper section of the upright with starting handle 3 in such a way that the plug 7 with the power cable 8 is on the right side (in direction of movement) (see...
Otros modelos de este manual:cortadoras de césped - ES 500 (547.12 kb)
cortadoras de césped - ES 500 (547.12 kb)
cortadoras de césped - ES 500 (547.12 kb)
cortadoras de césped - ES 500 (547.12 kb)