|
Resumen del manual
6)Only mow during daylight or under good lighting conditions. 7)Only Mow up or downwards a slope NEVER at an angle to the slope. Special care is needed when changing direction on slopes. 8)When driving to the area to be mowed, the ride-on lawnmower mechanism must not be switched on. 9)Never use machine in the event of damage to the bodywork or without protective equipment (i.e. grass collector bag, etc). 10)The correct position of the engine block has been specifically designed and set at the factory and must not be altered 11)Start by pressing the drive pedal with the greatest care, following the manufacturer’s instructions. Pay attention to feet positioning at a sufficient distance from the cutting blade. 12)Do not tilt the engine when departing and starting up. 13)This ride-on lawnmower has a safety device which switches off the engine every time that the operator leaves his seat. 14)Keep your hands or feet away from the rotating blades. Stay away from the discharge opening whilst the blade are rotating. 15)Do not manually move or lift the machine with engine running. 16)In the event of engine blockage, clogging of the discharge channel and in all maintenance operations on the cutter mechanism and in cases of temporary removal of the safety protections the engine must be switched off and the cutter mechanism disengaged. Important: remove the ignition key. 17)The engine must also be switched off: when you leave the machine or during its transportation before refuelling during the grass collection bag emptying operations. 18)Take the greatest care during the cutter regulation operations. Risk of injury!! Keep fingers away from the area between cutter and bodywork. Wear gloves. 19)Only empty the petrol tank in the open. 20)Before storing in a closed room, let the engine cool down. 21)In order to avoid risk of fire, the engine and exhaust must be kept free of grass, leaves and leaking grease. 22)The grass collection bag must regularly be checked for signs of damage 23)Do not mow in reverse. Maintenance and storage 1)Make sure that all nuts, bolts, and screws are kept well tightened to keep the mower in a safe operating condition. 2)Never leave the machine with fuel in the tank within an enclosed area where the fuel vapours could reach naked flames or sparks. 3)Allow the engine to cool before storing in any enclosure. 4)Keep the engine, silencer, battery compartment and petrol tank free from grass, leaves and excess lubricant, in order to reduce the danger of fire. 5)Frequently check the grass bag for wear or deterioration 6)For safety reasons, be sure to replace worn-out or damaged parts in due time. 7)If the fuel tank has to be drained, it is essential that this be done outdoor. 8)Assemble the blades following the corresponding instructions and use only blades bearing the maker's name or the trademark of the manufacturer or supplier and marked with the reference number. 9)To protect hands during disassembly or assembly of the blades, it is absolutely essential to wear suitable protective gloves. 17 ENGLAND . All maintenance, service and cleaning work must be carried out only after the engine has stopped and cooled off. The following operations may be carried out by the user himself. All other maintenance, service and repair works must be carried out by an authorized dealer. AFTER USING EACH TIMEAFTER FIRST 5 HOURSOFTENMONTHLYEVERY 25 OPERATING HOURS EVERY 25 OPERATING HOURSEVERY 25 OPERATING HOURS AT THE BEGINNING OFEVERY SEASON PRIOR TO STORING Engine check ¦ ¦ ¦ Oil change ¦ ¦ Filter cleaning ¦ Spark plug checke ¦ ¦ Air filter replacement ¦ Air duct cleaning ¦ Switch check ¦ Battery and terminal cleaning ¦ Brake check ¦ ¦ Tyre pressure check ¦ ¦ ¦ Blade sharpening or replacement ¦ Loose part check ¦ ¦ Mower cleaning ¦ ¦ In the event of using this ride-on lawnmower under extreme conditions and very high temperatures, check more often. #. You can check the motor oil level with the dip stick placed in the oil filler tank cap. The oil level must be between “MAX.” and “MIN.” notches. ().. Used oil can be removed from the oil tank mouth by means of an adapter Used oil must not be drained into the sewer system or waterworks. In (16). order to prevent any pollution to the water-table. Undertake the operations according to the sequence indicated in Fig. L. Once Most garages have used oil deposits, or use the authorized deposits done repeat the same operations in reverse order being sure to close connection according to your local authority regulations. (16), replace the cap and remove the tube used for the exhaust oil. ("&". Please follow the engine manufacturers operating instructions enclosed with this ride- on lawnmower and the fault finding guide. ""().. Always use only original spares! 1. Release the blade. Fit a new blade or re-sharpen the old one and re-fit. For safety reasons the blade should only be re-sharpened Should you not have the necessary tools to undertake this operation, take the by an Autho...
Otros modelos de este manual:cortadoras de césped - Choppy 125H (2.08 mb)