Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
,, Operation ,, Maintenance ,, Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. PRINTED IN U.S.A. FORM NO. 42035 rev. (03/31/09) SAFETY RULES .............................................................. 2 OPERATION .................................................................... 5 CARTON CONTENTS ..................................................... 2 REPAIR PARTS ILLUSTRATION ..................................... 6 FULL SIZE HARDWARE CHART .................................... 3 REPAIR PARTS LIST ....................................................... 7 ASSEMBLY ...................................................................... 4 PARTS ORDERING/SERVICE ...................... BACK PAGE Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. • Refer to your tractor owners manual for "Rules For Safe Operation". Look for this symbol to point out important safety precautions. It means --Attention!! Become alert!! Your safety is involved. The model number and serial numbers will be found on a MODEL NUMBER: 486.421264 decal attached to the Professional Brush Guard. 917.421264 You should record both the serial number and the date of SERIAL NUMBER: purchase and keep in a safe place for future reference. DATE OF PURCHASE: C \ REF QTY DESCRIPTION REF QTY DESCRIPTION A 1 Brush Guard C 2 Frame Brace B 1 Latch 2 Call 1-866-578-8388 for missing parts or assembly help DO NOT RETURN TO STORE _ 3 J / 1 / i J _____--J / ____---J J / ._____--. i J J / t J / J / Jf i f j7 J 8 9 10 REF QTY DESCRiPTiON REF QTY DESCRiPTiON 1 4 Carriage Bolt, 3/8-16 x 1" 6 2 Washer, .5312 x 1 x .0598" 2 2 Hex Bolt, 3/8-1 x 1" 7 2 Spring 3 2 Hex Bolt, 1/4-20 x 1-1/4" 8 4 Hex Nut (SIMS), 1/4" 4 2 Shoulder Bolt, 3/8-16 9 4 Lock Nut, 3/8" 5 2 Washer, 3/8" 10 4 Whizlock Nut, 3/8" Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE TOOLS REQUIRED FOR ASSEMBLY (2) 7/16" Wrenches (2) 9/16" Wrenches (1) 3/4" Wrench CAUTION! Muffler is hot! Allow engine to cool down before proceeding with bumper installation. STEP 1: (SEE FIGURE 1) • Slide the ends of the latch into the slots located on the bottom of the bumper. Push the front of the latch down past plastic shroud of bumper. Latch will be under the shroud and should appear as shown in figure 3 when assembled correctly'. Attach one spring onto the rod on each side of the latch. LATCH _SPRING FIGURE 1 STEP 2: (SEE FIGURE 2) * insert 1/4 x 1-1/4" hex bolt through one of the springs. * Assemble 1/4 x 1-1/4" hex bolt onto the bumper using two 1/4-20 hex nuts (SIMS) with end of bolt extending slightly through outside nut. * Repeat for spring on other side. 1/4" HEX NUT (SIMS) 114 X 1-114" HEX BOLT SPRING FIGURE 2 STEP 3: (SEE FIGURE 3) Assemble a 3/8 x 1" hex bolt, 3/8" washer, frame brace and 3/8" lock nut to the rear hole of the bumper. 318 X 1" HEX BOLT 318" WASHER / \ / 318" LOCK NUT FRAME BRACE FIGURE 3 4 Call 1-866-576-8388 for missing parts or assembly help DO NOT RETURN TO STORE STEP 4: (SEE FIGURE 4) STEP 5: (SEE FIGURE 5) * Assemble a shoulder bolt, large washer and 3/8" l...
Otros modelos de este manual:cortadoras de césped - 917.421264 (647.09 kb)