Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
No. Description 1695066 Dethatcher, Lawn 35" Simplicity MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA © Copyright 2007 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA. Rev. 04/2007 TP 400-4551-00-AT-SMA Notes The above parts group applies to the following Mfg. Nos.: 1695066 - Dethatcher © Copyright 2007 Simplicity Manufacturing, inc. All Rights Reserved. 2 TP 400-4551-00-AT-SMA Dethatcher, Lawn 35" NOTE: Unless noted otherwise, 16 95066 use the standard hardware torque specification chart. This attachment is not serviced by Simplicity. Please contact the following attachment manufacturer for service parts, service information, and technical literature. Brinly-Hardy Co. 3230 Industrial Pkwy. Jeffersonville, IN 47130 Toll Free: (800) 626-5329 The above parts group applies to the following Mfg. Nos.: 1695066 - Dethatcher © Copyright 2007 Simplicity Manufacturing, Inc. All Rights Reserved. 3 TP 400-4551-00-AT-SMA Hardware Identification Lockwasher Hex Nut Common Hardware Types Hex Head Capscrew (P c Carriage Bolt Standard Hardware Sizing When a washer or nut is identified as 1/2”, this is the Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. i\5 3 Screw, 1/2 x 2 Body Diameter & Torque Specifications Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 O SAE Grade 5 €5 SAE Grade 8 Size Of Hardware in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 1/4” Bolt or Nut Wrench—7/16” 5/16” Bolt or Nut Wrench—1/2” 3/8” Bolt or Nut 7/16” Bolt or Nut 1/2” Bolt or Nut Wrench—9/16” Wrench (Bolt)—5/8” Wrench—3/4” Wrench (Nut)—11/16”...