Iniciar sesión:
Votos - 3, Puntuación media: 4.3 ( )

Manual de usuario Standard Horizon, modelo CP180i

Fabricar: Standard Horizon
Tamaño del archivo: 2.74 mb
Nombre del archivo: b5f52f9b-5f3a-43fc-92e9-7ed16209bd1c.pdf
Idioma del manual:en
Fotos y especificaciones  Standard Horizon  CP180i
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


FCC Compliance Statement This device complies with Part 15 of the FCC limits for Class A digital devices. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions may cause harmful interference with radio communications. There is no guarantee that interference will not occur in a particular instance. If this equipment does cause harmful interference to other equipment, try to correct the problem by relocating the equipment. Consult an authorized STANDARD HORIZION dealer or other qualified service technician if the problem cannot be corrected. Operation is subject to the following conditions: (1) This device cannot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright 2006. STANDARD HORIZON All rights reserved. Printed in Italy. No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without prior written permission of the publisher. CAUTION -The GPS chart plotter is designed for maritime use. Please give attention to avoid water intrusion into the C-MAP NT+/MAX C-CARD cartridge holder. -Extensive exposure to heat may result in damage to the GPS chart plotter. -The GPS chart plotter contains dangerous high voltage circuits which only experienced technicians can handle. -STANDARD HORIZON will not be liable for errors contained herein, or for incidental or consequential damages in connection with the performance or use of this material. CLEANING PROCEDURE FOR THE GPS CHART PLOTTER SCREEN Cleaning of the chart plotter screen is a very important operation and must be done carefully. Since the surface is covered by a antireflective coating, the procedure for cleaning all the surfaces can be performed using the following procedure: You need a tissue or lens tissue and a cleaning spray (Windex) containing Isopropanol (a normal spray cleaner sold for the PC screen, for example PolaClear by Polaroid). Fold the tissue or lens tissue into a triangular shape, moisten the tip and use the index finger behind a corner to move the tissue across the surface, in overlapping side to side strokes. If the tissue is too wet, a noticeable wet film will be left in its path and you will need to repeat the process. If too dry, the tissue won’t glide easily, and may damage the surface. Page 6CP180 / CP180i TABLE OF CONTENTS 1. INTRODUCTION ...................................................................................................... 11 1.0 GENERAL INFORMATION .................................................................................... 11 1.1 PACKING LIST ...................................................................................................... 11 1.1.0 CP180C/180i Packing List ......................................................................... 11 2. GETTING STARTED ...................................................................................................... 13 2.0 MOUNTING THE GPS CHART PLOTTER ............................................................ 13 2.1 BRACKET MOUNTING .......................................................................................... 13 2.2 FLUSH MOUNTING ONLY FOR CP 180 ................................................................... 13 2.3 MOUNTING THE CP 180 GPS ANTENNA ............................................................ 14 2.3.0 Flush mounting the CP180 antenna .......................................................... 14 2.4 CONNECTIONS ..................................................................................................... 15 2.4.0 Connection Table ....................................................................................... 15 2.4.1 Connection ................................................................................................. 16 2.5 BATTERY CONNECTIONS ................................................................................... 17 2.6 NMEA CONNECTIONS .......................................................................................... 17 2.7 GPS POSITION ON A VHF RADIO ....................................................................... 17 2.8 OPTIONAL BLACK BOX FISH FINDER ................................................................ 17 2.9 OUTPUTTING NMEA TO A PERSONAL COMPUTER.........................................18 2.10 NMEA DATA PAGE ................................................................................................ 18 2.11 DEMO MODE ...................................................................................................... 18 3. CONTROLS AND INDICATORS ...................................................................................... 21 3.0 CONTROLS AND CONNECTIONS ....................................................................... 21 3.1 GETTING STARTED ......................................

Otros modelos de este manual:
navegadores GPS y receptores - CP180 (2.74 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría