Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• DO NOT use on wood flooring, it may cause scratching. • DO NOT use on slippery or uneven flooring. • Excessive exposure to audio equipment at high volume may lead to hearing loss. • DO NOT OPEN Caution: To reduce the risk of electric shock and fire, do not open the BOOMCHAIR™. There are no user serviceable parts inside. Refer to your warranty for service information. CAUTION FCC part 15.21: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC WARNING This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. SET-UP GUIDE The BOOMCHAIR™ comes with the following: PARTS LIST: 1) BOOMCHAIR™ 2) AC POWER SUPPLY (UL Listed) 3a) RCA TO MINI AUDIO CORD (headphone jack to audio left & right channel connectors) 3b) RCA CORD (audio left & right channel connectors) 3c) RCA AUDIO COUPLER 4) RECEPTACLE 5) HOOK & LOOP FASTENER 6) ADJUSTABLE RECLINE STOPPERS 7) DASHBOARD CONTROL PANEL 8) ADJUSTABLE HEADREST WITH SPEAKERS 9) ADDITIONAL SPEAKERS 8 3a 3b 1 5 6 4 9 7 2 SYSTEM SPECS: 3c 3 in. (7.5 cm) coaxial mid-high speakers @ 3W 4 Ohms 4 in. (10 cm) sub-woofer speakers @ 15W 4 Ohms DASHBOARD CONTROL PANEL (A) FADE CONTROL (B) BASS/TREBLE CONTROL (C) POWER SWITCH / VOLUME CONTROL (D) LED POWER INDICATOR (E) HEADPHONE JACK (F) RCA AUDIO OUTPUTS (G) RCA AUDIO INPUTS (VOLUME RATIO BETWEEN HEADREST & BASE SPEAKERS) POWERINPUTOUTPUTRRLLFADE+ BASS/TREBLE+ VOLUME+ ASSEMBLY INSTRUCTIONS Step 1: Lift seat back to the upright position. Step 2: Secure the seat back using attached hook & loop fasteners. Step 3: Insert receptacle (4) into adapter cord (2). Step 4: Plug adapter (2) into wall outlet.* Step 5: Turn Boomchair™ on by turning Power knob (C) clockwise. STEP 1 4 STEP 3 2 *CAUTION: Use only provided adaptor! Different voltage may cause permanent damage. CONNECTING TO GAME CONSOLES Note: Most game consoles are supplied with a custom connector with yellow video out and RCA red/white audio out. Step 1: Plug yellow composite video cable from game console into video input of TV. (Fig. 1) Step 2: Plug Red/White RCA cord from game console into RCA INPUT (G) of BoomChair™. (Fig. 2) Note: It may be necessary to extend your BoomChair™ further away from your TV or console. Here’s how. (Fig.3) Step 1: Connect Audio Coupler (3c) to Red/White RCA cord from game console. Step 2: Connect one end of RCA cord (3b) into other end of Audio Coupler (3c). Step 3: Connect other end of RCA cord (3b) into RCA INPUT (G) of BoomChair™. AUDIO COUPLER (3c) BOOMCHAIR™ TV GAME CONSOLE POWERINPUTOUTPUTRRLLFADE+ BASS/TREBLE+ VOLUME+ Fig. 2 Fig. 1 Fig. 3 IN 3b 3c Cable supplied with game console CONNECTING TO PORTABLE AUDIO / VIDEO DEVICES Step 1: Connect the Red/White ends of RCA cord (3a) into RCA INPUT (G) of BoomChair™. Step 2: Plug the single end of the RCA cord (3a) into the headphone jack of your device. Step 3: Turn Boomchair™ on by turning Power knob (C) clockwise. Step 4: Turn portable device on. POWERINPUTOUTPUTRRLLFADE+ BASS/TREBLE+ VOLUME+ iPod™* MP3 Player Portable Audio Device PSP Nintendo DS Portable Game Device 3a * Note: Some Apple™ devices such as iPhone™ require special 1/8in. (3.5mm) TTY adaptor (sold separately). CONNECTING TO AUDIO / VIDEO DEVICES Note: This is an easy connection if you already have your tv hooked up to a DVD or game console or are using an HDMI cable. If your TV does not have AUDIO OUTS, you will have to use one of the alternate connections in this manual. Step 1: Connect the Red/White ends of RCA cord (3b) into RCA INPUT (G) of BoomChair™. Step 2: Connect the other ends of RCA cord (3b) into AUDIO OUTPUT of Audio/Video device. Step 3: Turn Boomchair™ on by turning Power knob (C) clockwise. Step 4: Turn Audio/Video device on. POWERINPUTOUTPUTRRLLFADE+ BASS/TREBLE+ VOLUME+ TV VCR DVD Stereo Satellite Receiver Other Devices TV AUDIO OUT 3b DAISY CHAINING CHAIRS TOGETHER Step 1: Connect BoomChair™to any media device as described on pages 4 or 5. This is the first chair. Step 2: Connect one end of RCA cord (3b) into RCA OUTPUT (F) of first BoomChair.™ Step 3: Connect other end of RCA cord (3b) into RCA INPUT (G) of second BoomChair.™ Step 4: Turn all Boomchairs™ on by turning Power knob (C) clockwise. Repeat steps 2 and 3 from second chair to connect more BoomChairs.™ Up to 4 chairs can be connected. SECOND CHAIR FIRST CHAIR: Connected to device POWERINPUTOUTPUTRRLLFADE+ BASS/TREBLE+ VOLUME+ POWERINPUTOUTPUTRRLLFADE+ BASS/TREBLE+ VOLUME+ 3b Media Device TROUBLESHOOTING BOOMCHAIR™ Q: Why isn’t there sound coming from any of my speakers? A: Ensure your BoomChair™ is connected as described in the Setup Guide. Check that the power to the unit is on and the volume is turned up. Make sure your audio device ...