Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road. Step 1. Step 2. ! Screw the flexible steel shaft into the seat track bolt bracket. With a socket wrench, loosen the passenger seat track bolt, in- sert the seat track bolt bracket, and retighten the seat track bolt. Floor or Console Mounting For a more permanent mount, connect the Floor / Console Mount Bracket to the floor or console. This will require drilling into your vehicle’s interior surface. ! Drilling into the dash, floor, or console will permanently damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into the gas tank, electrical system or other highly sensitive vehicle components. Continued on next column... Package Contents: (1) CM088-TS-2 - 15” Flexible steel gooseneck floor or console mount Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4) Screws, (4) Plastic Caps, and (1) Flexible Steel Shaft with Plastic Tubing (1) APTTO - Adapter plate for TomTom ONE™ Series (1) APTTOXL - Adapter plate for TomTom ONE XL™ and XL• S™ Series (1) APTTGO520 - Adapter plate for TomTom GO™ Series (1) APTTEP - Adapter plate for TomTom EasyPort pattern (1) APTTSE - Adapter plate for TomTom Start™ and Ease™ Required Tools for Installation: 1. Socket wrench 2. Drill and screwdriver for optional floor or console mounting TomTom Device Compatibility: TomTom ONE 125 125-SE (TomTom EasyPort Mount) TomTom ONE 130, ONE 130-S (TomTom EasyPort Mount) TomTom ONE 140, ONE 140-S (TomTom EasyPort Mount) TomTom XL 325, XL 325-S, XL 325-SE (TomTom EasyPort Mount) TomTom XL 330, XL 330-S (TomTom EasyPort Mount) TomTom XL 335 Series (TomTom EasyPort Mount) TomTom XL 340, XL 340-S, XL 340 LIVE Series (TomTom EasyPort Mount) TomTom XL 350 Series (TomTom EasyPort Mount) TomTom XXL 530-S, XXL 535-T, XXL 540-S/WTE, XXL 550 Series (TomTom EasyPort Mount) TomTom ONE (US Edition, US 3rd Edition) TomTom ONE XL (1st Edition) - TomTom ONE XL-S (1st Edition) TomTom ONE 22, ONE 22 Regional, ONE 22 Regional Traffic TomTom XL 22, XL 22 Regional (TomTom EasyPort Mount) TomTom ONE UK / EUROPE (NEW Edition aka 2nd Edition, 3rd Edition) TomTom GO 520 / 530 / 630 / 720 / 730 / 920 / 920T / 930 TomTom Start and Ease TomTom, ONE, GO, and EasyPort, Start and Ease are product names, trademarks, or registered trademarks of TomTom International NV. Arkon Resources, Inc. is not affiliated with TomTom International NV. Step 1. Position the Floor/Console Bracket and drill into the floor or console. Step 2. Attach the Floor / Console Bracket with screws and cover with plastic caps. Step 3. Screw the steel shaft into the Floor / Console Bracket. Floor Mount Console Mount 3 Pedestal Head Adjustments Step 1. Adjust the steel shaft by bending with both hands to the desired location of the male dual T head. Step 2. Use the adjustment knob and wing nut on the pedestal head to swivel or rotate the head position if necessary. Continued on other side... ! Safety Precautions Do not install Arkon products over an air bag cover or within the air The Mobile Mounting Specialists™ bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or Consumer Hotline: air bag deployment. USA (800) 841-0884 Arcadia, CA 91006 USA Arkon is not responsible for any damages caused to your car, your INT’L (626) 254-9005 Designed in USA | Made in China and Taiwan device, or yourself due to the installation or use of this pedestal mount. Monday - Friday 9 am - 5 pm, PST © Copyright 2010 Arkon Resources, Inc. Step 2. While holding the mounted adapter plate, gently insert the TT125 | Flexible Gooseneck Seat Bolt or Floor Mount for TomTom® GPS TomTom ONE, ONE XL, or XL • S Adapter Plate and Device 4 Step 2. While holding the mounted adapter plate, gently insert the TT125 | Flexible Gooseneck Seat Bolt or Floor Mount for TomTom® GPS TomTom ONE, ONE XL, or XL • S Adapter Plate and Device 4 Attachment device (not included, sold separately) into the adapter plate until an audible click is heard. The device can then be rotated Step 1. Slide the adapter plate (D) up into the grooves on the back of the TomTom ONE, ONE XL, or ONE XL • S device (E). D E TomTom GO Adapter Plate and Device Attachment Step 1. Slide the adapter plate (D) up into the grooves on the back of the TomTom GO 520, 530, 630, 720, 730, 920, 920T, and 930 models device (E). D E Step 2. Attach the device to the pedestal by inserting the dual T-slots on the adapter plate (F) to the dual-T tabs on the mount head (G). TomTom EasyPort Adapter Plate and Device Attachment Step 1. Connect the dual T-slots (A) on the back of the adapter plate to the dual T-tabs (B) on the mount pedestal head. A B into the desired viewing angle. TomTom Start & Ease Device Installation - Pedestal Attachment Step 1. Attach the TomTom dual-T adapter plate to the mount by inserting the dual-T tabs of the pedestal (A) into the ...