Votos - 2, Puntuación media: 4 ( )

Fabricar: Invacare Tamaño del archivo: 165.01 kb Nombre del archivo: Idioma del manual:

Repeat this procedure for the opposite side of the chair frame. Tube Short Hex Support Screw Long Hex Screw Right Inside Armrest Bracket Armrest Spacer Rear Armrest Socket Bracket Spacer Mounting Hole Right Chair Frame Right Outside Armrest Bracket DETAIL “B” TOP VIEW RightLeft INSIDE OUTSIDE OUTSIDE Armrest Spacers FIGURE 3 - REAR ARMREST SOCKET INSTALLATION - CONVENTIONAL ARMS 3 4 REAR ARMREST SOCKET INSTALLATION ON WHEELCHAIRS BUILT AFTER 7/00 Space Saver Armrest Sockets (FIGURE 4) Space Saver Kit No. 1094952 includes the following: DESCRIPTION QTY. Armrest Brackets 2 Front Armrest Sockets 2 Rear Armrest Sockets 2 Tube Supports 2 Nylon Washers 4 Long Hex Screw 2 Short Hex Screw 6 Locknuts 6 Hex Locknut 2 1. Position armrest bracket into mounting position. Refer to Owner’s Manual, supplied with the wheelchair, for proper mounting positions. FIGURE 4 - REAR ARMREST SOCKET INSTALLATION ON WHEELCHAIRS BUILT AFTER 7/00 - SPACE SAVER ARMREST SOCKETS Tube Support Armrest Socket Washer Armrest Bracket Wheelchair Frame Locknut Tube Support Armrest Socket Washer Short Hex Screw Armrest Bracket Armrest Bracket Armrest Socket Armrest Stop MOUNTING HOLES Short Hex Screw 2. Install armrest bracket onto wheelchair frame and secure using short hex screw and locknut. Securely tighten. 3. Insert the tube support into the armrest socket ensuring that the holes in the tube support align with the holes in the armrest socket. 4. Install the armrest socket into the armrest bracket. NOTE: Mounting hardware must be installed in the oreintation shown in FIGURE 4. 5. Install short hex screw through armrest bracket, washer, armrest socket, tube support, washer and armrest bracket as shown in FIGURE 4. 6. Secure with locknut. 7. Install remaining short hex screw (used as armrest stop) through armrest bracket and secure with locknut. 8. Repeat this procedure for the opposite side of the chair frame. Conventional Armrest Sockets (FIGURE 5) Conventional Kit No. 1094953 includes the following: DESCRIPTION QTY. Armrest Bracket 2 Bracket Spacer 2 Front Armrest Socket 2 Rear Armrest Socket 2 Coved Armrest Spacer 2 Tube Supports 2 Nylon Washers 2 Long Hex Screw 2 Medium Hex Screw 2 Short Hex Screw 2 Locknuts 4 Hex Locknut 2 1. Position armrest bracket into mounting position. Refer to Owner’s Manual for proper mounting positions. 2. Install armrest bracket onto wheelchair frame and secure using short hex screw and locknut. 3. Insert the tube support into the armrest socket ensuring that the holes in the tube support align with the holes in the armrest socket. 4. Install the armrest socket into the armrest bracket. NOTE: Mounting hardware must be installed in the oreintation shown in FIGURE 5. 5. Install long hex screw through armrest socket, tube support, coved armrest spacer, washer, armrest bracket, spacer and armrest bracket as shown in DETAIL “A”. NOTE: Ensure armrest socket is flush in coved spacer. 6. Secure with locknut. DETAIL “A” - TOP VIEW LEFT RIGHT Wheelchair FrameTube...

Descargar ahora

Introduzca dos números de la imagen: