Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Jam Nut Figure 19 Footrest Adjustment Screw 21 Alante. GP201 Manual Revised 060208 COMFORT SETTINGS Cont. FOOTREST HEIGHT ADJUSTMENT 1) Remove the shroud 2) Use an Allen™ wrench to remove the bolts indicated in Figure 20. 3) Slide the footrest to the desired height. 4) Align the bolt holes in the footrest and the footrest bracket. 5) Install and tighten the bolts. Figure 20 FOOTREST EXTENDING 1) Lift the rubber pad from the footrest plate. 2) Loosen the two (2) footrest adjustment screws. 3) Slide the footrest plate to the desired position and tighten the adjustment screws. NOTE: The maximum extended length is not at the end of the slots. Figure 21 22 Alante. GP201 Manual Revised 060208 COMFORT SETTINGS Cont. FOOTREST EXTENSION OPTION 1) Place the footrest extension onto the footrest as shown below. 2) Install the footrest extension bolt. 3) Install a lock washer and locknut on the bolt and tighten securely. 4) Tighten the set screw. Figure 22 Figure 23 JOYSTICK CONTROLLER BRACKET LENGTH 1) Loosen the knob at the underside of the joystick controller receiver. 2) Loosen and unwrap the Velcro® straps holding the controller cord in place. 3) Slide the joystick controller extension arm forward or rearward to find a comfortable position. 4) Tighten the knob at the underside of the joystick controller receiver to secure the joystick controller extension arm. 5) Route the joystick cable to the inside of the armrest and secure in place with the Velcro® straps. 23 Alante. GP201 Manual Revised 060208 OPERATION Your Alante.™ is simple to operate. However, for your safety and the safety of others, Golden Technologies, Inc. recommends that you carefully read and understand the following operating instructions. We also recommend that you practice operating your Alante.™ in an area free of any obstacles. Once you have gained confidence in your ability to control your power chair, you will more easily be able to operate it in normal daily conditions. A WORD OF CAUTION Before turning on the power of your Alante., take note of your environment and set your speed control accordingly. (see “Speed Control Buttons” Figure 25) For indoor driving, we recommend that you select the lowest speed setting. For outdoor driving, we recommend that you select a speed setting at which you feel comfortable, safe, and in control of your power chair. Familiarize yourself with the features of your Alante. described below and follow the instructions to safely operate your power chair. Joystick Controller Display The joystick controller display (See Figure 25) is a multifunctional visual display. This display provides three types of information. 1) On/Off status 2) Battery charge level 3) Fault diagnostics 1. On/Off Status When you turn on the power to your Alante., the LED array will light up (see Figure 25). To turn the power on, press the on/off button (see Fig. 25). To turn the power off, press the on/off button (see Fig. 25) ¦ If the LED array is not lit, the joystick controller and the power chair are not in operating mode. 24 Alante. GP201 Manual Revised 060208 OPERATION Cont. 2. Battery Charge Level The joystick controller LED array is composed of eight (8) LED’s. ¦Two (2) red ¦Two (2) amber ¦Four (4) green When all eight (8) LEDs are lit continuously, there is a full charge on the batteries. As you use your power chair and the batteries discharge, LEDs in the array will begin to turn off in descending order. A single lit red LED indicates the lowest state of operable charge on the batteries. The batteries should be charged immediately. Horn On/Off Joystick Controller Battery Charge/LED Array Speed Setting Array Speed Control SLOWER Speed Control FASTER Figure 25 25 Alante. GP201 Manual Revised 060208 OPERATION Cont. NOTE: To ensure a dependable battery charge, we recommend that you charge the chair’s batteries overnight. Doing this will prolong the life of the batteries and spare you loss of operational power while you are using your chair normally. Do not charge the batteries when all 8 LEDs are lit, indicating that the batteries are at full charge. Charging the batteries when they are fully charged will shorten the life of the batteries. 26 Alante. GP201 Manual Revised 060208 OPERATION Cont. FREEWHEEL MODE ¦ To disengage the gears and put your power chair in freewheel mode, turn the brake release levers outward. See Figure 26. ¦ To re-engage the gears and take your chair out of freewheel mode, turn the levers rearward. See Figure 27. Figure 26 Figure 27 1. Never put your power chair in freewheel mode when it is on a slope or incline of any type. 2. Never put your power chair in freewheel mode while you are operating your power chair. 3. Never put your power chair in freewheel mode without a trained attendant present. THERMAL ROLLBACK Your Alante. is equipped with a safety system. A microprocessor monitors the operating temperatures of the joystick controller. In the event of excessive heat occurring in the joystick controller, the joys...
Otros modelos de este manual:Sillas de ruedas - ALANTE GP201CC (1.17 mb)