Votos - 1, Puntuación media: 4 ( )

Fabricar: 3Com Tamaño del archivo: 275.5 kb Nombre del archivo: Idioma del manual:

Return the instrument to a qualified dealer for service and repair to ensure that safety features are maintained. II. Connecting the power line 1. Inspect the power selection switch on the back panel, to assure if the selected voltage is the same as environment power voltage. If not, please refer to the notice around the power plug. 2. Before connecting the power supply, please be sure that the switch on the front panel should be in the off position. 3600 Series Programmable Power Supply VERSION 2.0 2004.6 3600 SERIES USER MANUAL 3. Connect the power cable to the AC in the power supply and the 3 connector plug. Please be sure that the power supply is grounded. 4. Press the switch on the front panel to switch on the instrument and you can start to use it. III.Fuse 1. The fuse is at the position of power input part on the back panel, for the purpose of avoiding failure brought by using wrong voltage. Please pay attention to the following items when you change the voltage input and the fuse. 2. Before changing the voltage and fuse, please be sure that the AC power is switching off, and be sure that there is no other equipment connected to this instrument. 3. Put a screwdriver into the fuse mounting, press it and the fuse mounting will pop up. 4. Pull out the fuse, change it according to the label beside the power input plug. Warning: To avoid damaging the instrument, please be sure to change a suitable type fuse. IV. Power supply 1. For safety reasons, please be sure not to have any short circuit between plus and minus pole. 2. Output wire should be insulated completely to the connected equipment. 3. Before using the instrument, you should switch on the power supply for 30 minutes. 3600 Series Programmable Power Supply VERSION 2.0 2004.6 3600 SERIES USER MANUAL Chapter 1 General Introduction 1.1 General Introduction The ARRAY 3600 Series Power Supply is a compact programmable DC power supply. It is equipped with back-light LCD display, number keypad and rotary knob which make it much easier to use. It can be operated at constant voltage mode or constant current mode. Programming feafures include over-current protection, maximum output voltage and power limitation, and 10 parameters storage. It is an essential instrument for scientific research, education, service and so on institutions. 1.2 Specification Model 3644A 3645A 3646A Number of outputs 1 1 1 DC outputs Voltage 0 to 18V 0 to 36V 0 to 72V Current 5A 3A 1.5A Power(max) 90W 108W 108W Line Regulation Voltage 0-3.999V: 0.01% + 3mV 4-18V: 0.02% + 10mV 0-3.999V: 0.01% + 3mV 4-36V: 0.02% + 10mV 0-3.999V: 0.01% + 3mV4-72V: 0.02% + 10mV Current 0.02% + 8mA 0.02% + 8mA 0.02% + 8mA Load Regulation Voltage 0.02% + 20mV 0.02% + 10mV 0.02% + 10mV Current 0.02% + 15mA 0.02% + 10mA 0.02% + 8mA Ripple and noise Voltage <1mVrms <1mVrms <1mV...

Descargar ahora

Introduzca dos números de la imagen: