Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
com/welcome. For online help, go to t. Feature highlights Your surge protection is equipped with any of the following features. Check the availability of these features on the package. Protection indicator: aler ts you on the operating status of the surge protector. Power blocker protection: cuts off all power to AC outlets in the event of an electrical or power surge that overwhelms its protection. Phone/fax/modem protection: provides maximum protection against surges present on standard tw o-wire dial-up phone ser vice. Network/data protection: pro vides maximum protection against surges present on the network or phone lines. Coaxial cable protection: p r o v id e s maximum protection against surges present on standard coaxial and broadband lines. 4 EN English 3 Get started This surge protector is designed to guard the connected equipment against electrical damage. Philips offers an entire line of surge protectors to safeguard your home electronics and computer systems. Connect the surge protector Plug the power cord into a properly 1 grounded outlet. Plug the power cord of device into surge 2 protector. Caution • Do not use any extension cords, adapters, other grounding wire or electr ical connections with your surge protector. Doing so will void all Philips warranties. Connect a USB device to the surge protector for USB charging Note • The USB por ts are for charging only and not protected by the surge protector. Some Philips surge protector models come with USB por ts.You can charge your smar t phone or other USB devices through the USB por ts on your surge protector. 1 Connect one end of a USB cable to the USB por t on the surge protector. 2 Connect another end of a USB cable to the USB device. Connect the surge protector to a phone/fax/modem Some Philips surge protector models come with phone/fax/modem surge protection, Instead of running a connection directly from your phone/ fax/modem to the wall jack, pass the connection through the protected jacks on your surge protector. IN/OUT phone protection Connect your phone/fax/modem line to 1 the input jack IN on the surge protector. Connect one end of a phone cord into the 2 output jack OUT on the surge protector, and the other end to the phone/fax/ modem jack of device. Splitter phone line protection If you have one telephone number for both your modem and telephone, you can split the incoming phone line into two outs: 1 Connect your phone/fax/modem line to the input jack IN on the surge protector. 2 Connect one end of a phone cord into the output jack OUT on the surge protector, and the other end to the phone/fax/ modem jack of device. EN 5 a connection directly from your TV/VCR/ Note DVD/satellite/cable box to the wall jack, pass • You cannot use the modem and phone at the same time. the connection through the protected coaxial connections on your surge protector. Conditions for damage claims • To claim damage under the connected equipment warranty as a result of telephone ser vice line transients, ensure the equipment is properly connected to a Philips surge protector which offers telephone line protection. Also, ensure the telephone ser vice equipment has included a properly installed and operating primar y protection device at the ser vice entrance (such devices are normally added during telephone line installation). • If you fail to connect the phone/fax/modem protection, your connected equipment will not be covered by the connected equipment warranty. • Most modem damage can be prevented if you connect the phone/fax/modem protection carefully and properly. • Surge protector models with telephone protection are designed to provide maximum protection from surges present on standard two wire dial-up telephone ser vice. Other communication networks which use modular jacks are not necessarily benefit from this protection. Caution • The telephone feature of this product could be rendered inoperable if improperly installed. Connect the surge protector to a TV/VCR/DVD/satellite/ cable box Some Philips surge protector models come with coaxial cable surge protection. Instead of running 6 EN Connect your incoming cable/broadband 1 line to the input coaxial connector on the surge protector. Connect one end of a coaxial cable to the 2 output coaxial connector on the surge protector, and the other end of to the input coaxial connector of the device. device 1 device 2 Conditions for damage claims • To claim damage under the connected equipment warranty as a result of coaxial line transients, ensure the equipment is properly connected to a Philips surge protector which offers coaxial line protection. • If you fail to connect the coaxial cable protection, your connected equipment will not be covered by the connected equipment warranty. Most TV/VCR/ DVD/satellite/cable box damage can be prevented if you connect coaxial cable protection carefully and properly. Caution • The coaxial feature of this product could be rendered inoperable if impro...
Otros modelos de este manual:Fuente de alimentación y fuente de alimentación - SPP4068A/17 (155.77 kb)