Votos - 4, Puntuación media: 4.8
(
)
)
|
Resumen del manual
All rights reserved. Model: 232HSP RS-232 High Energy Surge Protector CE Overview The Model 232HSP is designed to help protect against lightning strikes, power surges, and other types of voltage disturbances. Pins 2 through 8 and 20 are protected on a DB-25 style connector with a final clamping voltage of approximately 15 volts. The 232HSP offers three stages of protection starting with a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). In order for a surge protector to work properly it is important to have a good connection to earth ground. The 232HSP offers two terminal posts and two metal mounting brackets that can also provide for a good ground connection for the user. Pin 1 of the DB-25 connectors is connected to the metal box through the terminal posts. The 232HSP has been tested to two specifications at 6 kilovolts, IEC 1000-4-5: 1995 “Surge Immunity Test” and IEEE C62.41-1991 “IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits”. To ensure the best protection of your equipment some simple connection guidelines should be followed. Connections 1. The 232HSP should be located as close as possible to the equipment being protected. 2. A good ground connection must be made between the 232HSP and earth ground. This can be done with the two terminal posts on the top of the unit or the two mounting brackets. 3. The earth ground connection should be kept as short as possible for best performance. As a recommendation a minimum of 10 gauge copper wire at no more than 3 feet should be used. If it is not possible to achieve the short distance a braided cable made specifically for grounding purposes should be used. 4. The chassis ground of the equipment should be connected to the buildings 3 prong plug ground. Specifications Clamping Voltage, stage one: Series Resistance, stage two: Clamping Voltage, stage three: Clamping Time: Connectors: Dimensions: Weight: Min. 72 VDC, Max.108 VDC 2.7 Ohms Min. 14.3V, Max 15.8 V Less than 5 x10-9 seconds Line side: DB-25P male connector Equipment side: DB-25S female connector Approximately 5.3L X 4.4W X 1.9H in (13.5 x 11.2 x 4.8 cm) Approximately 11.8 Ounces (.3 kg) DECLARATION OF CONFORMITY Manufacturer’s Name: Manufacturer’s Address: Model Number: Description: Type: Application of Council Directive: Standards: B&B Electronics Manufacturing Company P.O. Box 1040 707 Dayton Road Ottawa, IL 61350 USA 232HSP RS-232 High Energy Surge Protector Light industrial ITE equipment 89/336/EEC EN 50082-1 EN 61000 (-4-2, -4-3, -4-4, -4-6) William H. Franklin III, Director of Engineering International Headquarters: B&B Electronics fllfg. Cn. 707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@bb-elec.com B&B Electrunics Ltd Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax+353 91 792445 support@bb-europe.com Integrate - Expand - Simplify B&B ELECTRONICS PRODUCT INFORMATION LINE SIDE EQUIPMENT SIDE 232HSP4502-2/2 © 2002 by B&B Electronics. All rights reserved. PROTECTED EQl (DTE) DB25 MALE 1 FR GND 2 TD 3 RD 4 RTS 5 CTS 6 DSR 7 SG GND 8 DCD 20 DTR (DCE) DB25 FEMALE EARTH GREEN WIRE GROUND 10 GAUGE COPPER WIRE AT 3 FEET LONG. OR BRAIDED CABLE MADE SPECIFICALLY FOR GROUNDING PURPOSES. LINE SIDE DB-25 MALE (DTE) J 1 :1 - J 1 :3 J1 :4 J 1 :5 J 1 :8 G2 CG90L CG90L G4 CG90L G5 G6 CG90L CG90L G8 CG90L 0 DEI HSR TERMINAL POST TR1 R1 1.5KE15CA 2.7 OHM 2 WATT TR2 R2 1.5KE15CA 2.7 OHM 2 WATT R3 2.7 OHM 2 WATT 1.5KE15CA TR4 R4 2.7 OHM 2 WATT .5KE15CA TR5 R5 • 5EE15CA 2.7 OHM 2 WATT TR6 R6 2.7 OHM 2 WATT • 5KE15CA TR7 1.5EE15CA 2.7 OHM 2 WATT TR8 R7 R8 .5KE15CA 2.7 OHM 2 WATT P2 ■'TERMINAL POST EQUIPMENT SIDE DB-25 FEMALE (DCE) -■' J2:1 (FG) J2:2 (TX) J2:3 (RX) J2:4 (RTS) - J2:5 (GTS) J2:6 (DSR) J2:7 (SG) J2:8 (CD) — :J2:20 (DTR) International Headquarters: B&B Elettrnnjcs ITlfg. Un. 707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 support@bb-elec.com B&B Elect runic!» Ltd WestlinkCommercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 bb-europe.com orders@bb-elec.com support@bb-europe.com...