Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. DO NOT USE AN EXTENSION CORD. Remove Packaging and Parts Installation Below a Countertop • Place carton on a flat surface. • Open one end of the carton and lift off the top piece. • Lift the warmer up and out of the carton. • Place the drawer on top of the shipping carton to protect the drawer front and the finished flooring. Electrical Outlet Against Rear Cabinet Wall 9" From Floor Flush With Side of Ca

Before you begin — Read these instructions completely and carefully. IMPORTANT - Save these instructions for local inspector’s use. IMPORTANT - OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer - Be sure to leave these instructions with the Consumer. Note to Consumer - Keep these instructions with your Owner’s Manual for future reference. WARNING ATTENTION Cet appareil doit etre correctement mis a la terre. Consulter page 4. This appliance must be properly grounded. See “Electrical S

Failure to follow these instructions could damage your equipment and void its warranty. Note: Online instructions covering customer-installable parts are available at Tools Required No tools are required for this procedure.You may, however, find a Phillips screwdriver useful in releasing the thumbscrews at the front of the server. Opening the Server The server slides open from the front of the rack. The top cover remains in place in the rack while the bottom housing (containing all internal comp

Esta solucion basica ofrece todo lo que pueda necesitar de una fuente de alimentacion— un ventilador silencioso de 120 mm para una optima refrigeracion, salidas duales de +12V para ofrecer la maxima estabilidad en la alimentacion, un circuitaje de proteccion industrial y PFC activa. La fuente de alimentacion VP700P no dispone de luces intermitentes ni disenos elaborados. Con esta fuente de alimentacion, solo recibira las funciones que necesita, incluida la garantia de calidad de 2 anos de Antec.