Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
.. 1 SAFETY MESSAGES 1 A WARNING 1 Operator Instructions Personal Safety Equipment Always Read Instructions Before Includes: Use -Safety Glasses YES 1 @ Using Power Tools 1 Safety Rules Use -Safety Gloves YES (^ Always Wear Safety Goggles ores seen Use Work Stations Use-Safety Boots @ Wear Hearing Protection Putting Into Service Use -Breathing Masks YES A A Avoid Prolonged Exposure To Vibration Operating Use -Ear Protectors YES Dismantling and Assembly. Safety rules when using a 5264 & 5266 Needle ScalerIChipper -Always wear safety goggles. local, regional or country legal requirements when -Prolonged exposure to vibration may cause injury. installing, using or maintaining the tool. -Read all instructions beforeusing this tool. All operators must -Take care that the exhaust air does not point towards any be fully trained in itsuseand awareof these safety rules. other person or material or substance that could be -Do not exceed the maximum working air pressure. contaminated by oil droplets. When first lubricating a tool -Use personal protection equipment as recommended. or if the tool exhaust has a high oil content, do not allow -Some dust created by power sanding, sawing, grinding, the exhaust air to come near very hot surfaces or flames. drilling, and other construction activities contains -Never lay the tool down until the working attachment has chemicals known to cause cancer, birth defects and other stopped moving. reproductive harm. -When the tool is not in use, shut off the air supply and -Use compressed air only at the recommended conditions. press throttle triggerhever to drain the supply line. If the -If the tool appears to malfunction, remove from use tool is not to be used for a oeriod of time. first lubricate. immediately and arrange for service and repair. If it is not disconnect from air supply and store in a dry average room practical to remove tool from service, then shut off the air temperature environment. supply to the tool and write or have written a warning -If the tool is passed from one user to a new or inexperi- note and attach it to the tool. enced user, make sure these instructions are available to -If tool is to be used with a balancer or other suspension be passed with the tool. device, ensure that the tool is firmly attached to the -Do not remove any manufacturer fitted safety devices suspension/support device. where fitted, i.e., wheel guards, safety trigger, speed -When operating the tool, always keep the body and governors, etc. particularly the hands away from the working attachment -Wherever possible, secure workpiece with clamps, a vise, ixed to the tool. etc. to make it rigid so it does not move during the work -The tool is not electrically insulated. Never use the tool if operation. Keep good balance at all times. Do not stretch there is any chance of coming into contact with live or overreach. electricity. -Try to match the tool to the work operation. Do not use a -Always when using the tool, adopt a firm foo...
Otros modelos de este manual:Jardín de las trituradoras - 5266 (343.53 kb)