Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
When the timer runs out, the display will show the rack number of the rack which has timed out. Racks-Being-Timed Indicators Rack timers are running for the indicated racks. The name of the rack that will next finish will flash. Time Knob Turn to set the desired cook time. Timer Buttons Used to preset frequently used cooking times. To assign a time duration to one of these buttons, hold down the button and turn Timer Knob. Then to start a rack timer using that time duration, press the Timer Button and then press the appropriate Rack Button. Rack Buttons Press to start the timer of the corresponding rack (after specifying a time duration using either the Time Knob or a Timer Button). Oven Interior Light Switch Press to turn on the oven interior light. Light remains on for as long as the switch is held. LIGHTS POWER ON OFF HEAT ON TIME TEMP TIMER 4 TIMER 1 TIMER 5 TIMER 2 TIMER 3 RACK 4 RACK 1 RACK 5 RACK 2 RACK 3 ACTUAL TEMP CANCEL FAN HIGH LOW FAN CONT CYCLE Power Switch Use to switch oven on or off. Heat-On Indicator Lit when the burners are operating. Temperature Setpoint Display Indicates temperature setpoint. Flashes until setpoint is reached. Fan Speed Indicator Indicates fan speed is set to either High or Low. Fan Mode Indicator Indicates whether fan is set to run continuously (CONT) or to cycle on and off with the burners (CYCLE). Temperature Knob Turn to set the desired cooking temperature. Cancel Button Press to silence the beeping that starts when a timer runs out. To cancel a running timer, press the corresponding Rack Button, then press this button. Fan Speed Button Press to select whether fan runs at high or low speed. Fan Mode Button Press to select continuous or cycling fan mode. Actual Temperature Button Press to display the actual interior oven temperature instead of the desired temperature. PAGE 30 OPERATOR’S MANUAL 1181958 ELECTRIC CONVECTION OVENS OPERATION Operation of RACK TIMER Models Rack Timer models have five independent timers, one for each rack. After loading a rack, you can start a timer for that rack. The control panel displays which racks are being timed, which rack will be the next to time out, and how much time remains before that happens. Of course, the oven temperature, fan speed, and fan mode are the same for all racks. You can manually set a cooking time each time you load a rack, or you can preset up to five time durations that you can then recall by pressing the corresponding Timer Button. To assign a time duration to a Timer Button, hold down the corresponding button (TIMER1, TIMER2, TIMER3, TIMER4, or TIMER5), turn the Time Knob to the desired time, and release the Timer Button. Step 6 below describes how to use these buttons to set a rack’s timer. The rack timers are reminders to you of when to remove pans from the oven. The rack timers do NOT control the temperature of the oven. To cook using the rack timers, do the following: 1. Turn the oven ON using the Power Switch at the top of the control panel. 2. Set the cooking temperature by turning the Temperature Knob. The setting appears in the top right corner of the control panel display. The displayed temperature will flash while the oven preheats. 3. Select the desired fan speed by pressing the Fan High/Low Button. The setting (HiFAN or LoFAN) appears in the control panel display just below the temperature setting. The appropriate fan speed depends on the type of food being cooked. 4. Select the desired fan mode by pressing the Fan Cont/Cyc Button. The setting appears in the control panel display just below the fan speed setting. In continuous mode (CONT), the fan will run when the oven is ON and the doors are closed. In cycle mode, the fan will run only when the doors are closed and the burners are operating. 5. Wait until the oven has reached cooking temperature (when it does, the temperature display will stop flashing and the oven will “beep” once). To display the actual temperature in the oven at any time, press the Actual Temp button. 6. Open the oven doors and insert a pan onto a rack. Close the doors and then either turn the Timer Knob until the desired cooking time appears on the control panel display, OR press the Timer Button that corresponds to a preset time that you have associated with that button. Finally, start the timer by pressing the Rack Button that corresponds to the just-loaded rack. The time display will start to count down. The time display indicates the time remaining until the next time-out of a rack timer will occur. To display the time remaining for any rack, press the corresponding Rack Selector button. You can add additional pans at any time. The timer for each rack works independently. The bottom line of the control panel display indicates which racks are presently being timed (RACK1, RACK2, RACK3, RACK4, and/or RACK5). The one that is flashing indicates which rack is the next one that will time out. If you open the oven doors, all rack timers pause until the oven doors are closed agai...
Otros modelos de este manual:Hornos Eléctricos - ES/20SC (3.49 mb)