Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario AEG, modelo COMPETENCE B 2100

Fabricar: AEG
Tamaño del archivo: 539.67 kb
Nombre del archivo: 947162en.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


. Only appliances of this type may be installed next to a high cupboard or a wall. • Contact protection must be guranteed by the installation. • The unit in which the appliance is fitted must satisfy the requirements of DIN 68930 in respect of stability. • This oven must be installed by qualified personnel to the relevant British Standards. • This oven is heavy. Take care when moving it • Remove all packaging, both inside and outside the oven before using the oven. • Do not attempt to modify the oven in any way. Installation Instructions Assembly Installation Instructions Important information Installation Instructions Installation Instructions Preparation, kitchen furniture Installation Instructions Installation Instructions Electrical connection Installation Instructions Attachment Installation Instructions Electrical Connection The oven is designed to be connected to 230-240V (50Hz) electricity supply The oven has an easily accessible terminal block which is marked as follows. Letter L -Live terminal Letter N -Neutral terminal or E -Earth terminal THIS OVEN MUST BE EARTHED The cable used to connect the oven to the electrical supply must comply to the specifications given below.. Min. size Cable/Flex Connection via Fuse Cable/Flex type Cooker control PVC/PVC twin 13A 2.5mm2 circuit and earth It is necessary that you install a double pole switch between the oven and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current rules. The switch must not break the yellow and green earth cable at any point. Important After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 60°C above the ambient temperature. Before the oven is connected, check that the main fuse and the domestic installation can support the load, and that the power supply is properly earthed. The manufacturer disclaims any responsibility should these safety measures not be carried out. 54 55 AEG Hausgerate GmbH Postfach 1036 D-90327 Nurnberg © Copyright by AEG ANC 822 947 162 - 06 - 0101 ...

Otros modelos de este manual:
Hornos Eléctricos - COMPETENCE B 2100 (539.67 kb)
Hornos Eléctricos - COMPETENCE B 2100 (539.67 kb)
Hornos Eléctricos - COMPETENCE B 2100 (539.67 kb)
Hornos Eléctricos - COMPETENCE B 2100 (539.67 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría