Votos - 1, Puntuación media: 5 ( )

Fabricar: AEG Tamaño del archivo: 1.83 mb Nombre del archivo: Idioma del manual:

Do not use the appliance if the door gasket is damaged. Contact the Service Centre. • To clean the door gasket refer to the general information about the cleaning. Stainless steel or aluminium appliances: Clean the oven door with a wet sponge only. Dry it with a soft cloth. Do not use steel wool, acids or abrasive materials as they can damage the oven surface. Clean the oven control panel with the same precautions Pyrolytic cleaning 1. Remove all parts from the appliance. Care and cleaning 23 The pyrolytic cleaning procedure cannot start: – If you do not remove the core temperature sensor plug from the socket, the display shows „C2“ – If you do not close the oven door correctly, the display shows „C3“. 2. Remove the worst of the residual dirt manually. 3. Set the Pyrolytic cleaning function (refer to "Oven functions"). 4. Touch to activate the Pyro cleaning function. 5. Touch or to set the duration of the cleaning procedure: – P1 1:30 for a low degree of dirt – P2 2:00 for a usual degree of dirt – P3 2:30 for a high degree of dirt. Touch to confirm. You can use the End function to delay start of the cleaning process. During the Pyro cleaning the door is locked. The symbol and the bars of the heat indicator come up, until the door unlocks again. The door unlocks when temperature inside the oven is under safety condition and Pyro cleaning is finished. During pyrolytic cleaning the lamp is off. Cleaning reminder To remind you that the pyrolytic cleaning is necessary the cleaning reminder symbol flashes in the display after every deactivating the appliance for the next 10 seconds. The cleaning reminder goes off from the display: • After end of the pyrolytic cleaning function • When you deactivate it in the Settings menu (refer to "Settings menu") Telescopic shelf runners You can remove the telescopic runners to clean the side walls. Removing the telescopic runners 1. Pull the front of the telescopic runners away from the side wall. 24 24 Care and cleaning 2. Pull the telescopic runners from the rear side of the wall and remove the telescopic runners. 2 1 Installing the telescopic runners Install the telescopic runners in the opposite sequence. The retaining pins on the telescopic shelf runners must point to the front! CAUTION! Do not clean the telescopic runners in the dishwasher. Do not lubricate the telescopic runners. Oven lamp WARNING! Be careful! There is the risk of electrical shock! Before you change the oven lamp: • Switch off the oven. • Remove the fuses in the fuse box or switch off the circuit breaker. Put a cloth on the bottom of the oven for protection of the oven light and glass cover. 1. Turn the glass cover anti-clockwise to remove it. 2. Clean the glass cover. 3. Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb. Use the same oven lamp type. 4. Install the glass cover. Cleaning the oven door The oven door has four panels of glass. You can remove the internal panels of glass to clean th...

Descargar ahora

Introduzca dos números de la imagen: