Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
– After installation the appliance door should be slowly opened to ensure no damage has occurred. – No responsibility for lower trim damage will be accepted if these instructions have not been followed. OVEN DOOR LOWER TRIM AIR FLOWAir Flow Oven Door Lower Trim Fig. 33 27 27 Electrical Installation For your safety please read the following information: WARNING! Before effecting any intervention on the electrical parts the appliance must be disconnected from the network. IMPORTANT: The oven must be installed in accordance with the manufacturer’s instructions. Incorrect installation, for which the manufacturer accepts no responsibility, may cause damage to persons, animals and things. General – The connection to the electrical network must be carried out by qualified personnel and must be according to existing norms. – The appliance must be connected to the electrical network verifying above all that the voltage corresponds to the value indicated on the specifications plate and that the cables section of the electrical plant can bear the load which is also indicated on the plate. – The appliance can be connected directly to the mains placing an omnipolar switch with minimum opening between the contacts of 3 mm between the appliance and the mains. – The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C at any point. – Once the appliance has been installed, the switch must always be accessible. – If the power supply cable is damaged it must be substituted by a suitable cable. IMPORTANT: this double oven must be connected to a suitable double pole control unit adjacent to the oven. NO DIVERSITY CAN BE APPLIED TO THIS CONTROL UNIT. Feeder Cable Section Type HO5RR-F or H05VV-F 230 V~ 3 x 2.5 mm2 (**) (**) – Connection to wall-mounting distribution panel. The connection of the appliance to the grounding unit is mandatory. The manufacturer declines every responsability for any inconvenience resulting from the inobservance of this condition. 28 28 Connection the Double Oven Mains Cable Important! This oven must be connected to the mains power supply only by a suitably qualified person. Unscrew the screw A securing the cover plate B behind the oven (fig. 34). – Remove the cover plate B. – Remove the screws C from the cable clamp (fig. 35). – Insert the mains cable (type H05RR-F or H05VV-F - 3x2,5 mm2 section) into the cable protector P. – Connect the phase and earth cables to the mains terminal connection block D. EARTH N NEUTRAL L LIVE – Refit the cable clamp so that it clamps the outer sleeving of the cable, and screw the screws C. – Refit the cover plate B and fix it with the screw A. WARNING: This appliance must be earthed Green & Yellow (Earth) Brown (Live) Blue (Neutral) NLA C P D B Fig. 34 Fig. 35 29 29 Appliance Servicing CDA provide a quality and effective after-sales service to cover all your servicing needs. Please attach your receipt to this page for safekeeping. Please help us to help you by having the following information available when booking a service-call: 1. Model type, make and model – see the product data plate. 2. Evidence of installation / purchase date 3. Retailer where appliance was purchased 4. Clear and concise details of the fault 5. Full address including postcode and any contact phone numbers Contact telephone numbers CDA Customer Care Department – Telephone: 01949 862012 – Fax: 01949 862003 – Email: service@cda.eu 30 30 Guarantee CDA appliances carry a five-year parts and a one-year labour guarantee. CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be free of both labour and parts charges. After the first year and within five years, the parts will be supplied free of charge provided that the repair is carried out by an agent authorised by CDA and the labour will be charged at the commercial rate applicable at the time of repair. The appliance must have been installed by a suitably qualified person and in accordance with the manufacturer’s instructions and current legislation. The guarantee does not cover faults caused by the incorrect fitting of appliances. Limit of Cover – The guarantee does not cover cosmetic damage e.g. discolouration or oxidisation. – Proof of purchase or installation date must be produced before a service-call will be booked. – The appliance must be used for domestic purposes only. Appliances used for commercial or professional purposes are not covered by the guarantee. Commercial warranty is available at extra cost. – The appliance must not be modified or tampered with or repair attempted by any unauthorised person. – The guarantee does not cover damage caused in transit or by misuse, accident, abuse or neglect. – The guarantee does not cover routine maintenance. – Use of parts not supplied or recommended by |C|D|A| will invalidate the warranty. – Rubber seals, filters, removable glass parts, control knobs and buttons, fuses and light b...