Iniciar sesión:
Votos - 4, Puntuación media: 4.5 ( )

Manual de usuario GE, modelo JTP70BM

Fabricar: GE
Tamaño del archivo: 248.87 kb
Nombre del archivo: afba3f7a-1d95-41ee-beef-a514d509b7a4.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout. C=28-1/4" without trim and 28-3/4" with trim. Conduit (72" long) 5 27-1/4'' MIN. 27-5/16'' MAX. Cutout height A B 23-1/2'' MIN. Cutout depth 22'' MIN. Listed by Underwriters Laboratories Specification Revised 10/07 320224 JTP70BM/CM/WM GE® 30" Built-In Single Convection Wall Oven Dimensions and Installation Information (in inches) Optional Undercounter Installation 3-1/4 2 (two) 90°elbows & 3-1/2" MIN. Free space Junction box in adjacent cabinet for cooktop hook-up 30" built-in Power cord for cooktop 4" To 4-1/2" Junction box for oven sufficient pipe to connect in adjacent cabinet Right cabinet side 3/4" Support Shut-off valve Pressure regulator 1/2" Black iron pipe Union Conduit (72" long) oven 22 Side View For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Undercounter Installation This installation is to achieve minimum gap between bottom of countertop and control panel. Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick. Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Gas or electric cooktops may be installed over 5 24 25 this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models. Gas (including the pressure regulator) and electrical connections for gas cooktop must be located in an adjacent accessible location. For a 30" gas cooktop, the connections are more conveniently made to the right. 120 Volt Outlet Gas connection Junction box location 240/208V 36'' MIN. 4'' To 4-1/2 '' Toe kick allowable Match toe kick height front and two sides 22'' MIN. above support platform Top and/or side fillers may be necessary if unit is positioned between existing cabinets 28-1/2'' MIN. 28-5/8'' MAX. 27-1/4'' MIN. 27-5/16'' MAX. Cutout height 3/4'' Support platform required 23-1/2" MIN. Cutout depth Allow 11/16'' overlap over side edges of cutout 1-1/2" Countertop Optional Undercounter Installation With 30" CleanDesign or Sealed Burner Gas Cooktop 1-1/2" Typical countertop Power cord Reference. 5-9/16 5-9/16" Reference dim. for MAX. support height with typical 36" countertop height 36" Typical Countertop height 30-7/16 Free space 1-1/2" MIN. Side View 22 27-5/16" MAX. Cutout height 27-1/4" MIN. Junction box(s) foroven & radiant cooktop 22" from floor Add suitable filler to match adjacent cabinets when needed to maintain toe kick alignment Note: 36" ribbon cooktops are approved for use over GE 30" single wall ovens only. 30" ribbon cooktops are approved for use over GE 30" and GE 27" single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data. Installation Information: Before installing, consult installation i...

Otros modelos de este manual:
Hornos Eléctricos - JTP70CM (248.87 kb)
Hornos Eléctricos - JTP70WM (248.87 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría