Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
english
4 Brush the inside of the shaving unit (Fig. 9).
Service Department of Philips Domestic Appliances and
5 Brush the hair chamber (Fig. 10).
Personal Care BV.
important
6 Put the shaving unit back onto the shaver.
Troubleshooting
Read this user manual carefully before you use the
Problem
Solution
appliance and save it for future reference.
every two months: shaving heads
Warning
The shaver
You may not have cleaned the
doesn’t shave
appliance properly. Clean the shaving
-
This appliance is not intended for use by persons
Note: Do not use cleaning agents or alcohol to clean the
as well as it
heads thoroughly (see chapter
(including children) with reduced physical, sensory
shaving heads. Only use the HQ110 Shaving Head Cleaning
used to.
‘Cleaning and maintenance’).
or mental capabilities, or lack of experience and
Spray.
knowledge, unless they have been given supervision
1 Switch off the shaver.
Long hairs may be obstructing the
or instruction concerning use of the appliance by a
shaving heads. Clean the cutters
person responsible for their safety.
2 Remove the shaving unit (Fig. 8).
and guards properly with the brush
-
Children should be supervised to ensure that they
3 Turn the wheel anticlockwise (1) and remove the
supplied (see chapter ‘Cleaning and
do not play with the appliance.
retaining frame (2) (Fig. 11).
maintenance’).
Caution
4 Remove the shaving heads from the shaving unit
The shaving heads may be damaged
-
Use and store the appliance at a temperature
one by one (Fig. 12).
or worn. Replace the shaving heads
between 5°C and 35°C.
(see chapter ‘Replacement’).
-
This shaver is not waterproof and cannot be cleaned Note: Do not clean more than one cutter and guard at a
The batteries may be running low.
under the tap. Keep the shaver dry (Fig. 1).
time, since they are all matching sets. If you accidentally mix
Replace the batteries (see chapter
-
Remove the batteries from the appliance if you are
up the cutters and guards, it may take several weeks before
‘Preparing for use’).
not going to use it for quite some time.
optimal shaving performance is restored.
Compliance with standards
The
The batteries may be empty. Replace
5 Remove the cutter from the guard (Fig. 13).
shaver doesn’t the batteries (see chapter ‘Preparing
-
This Philips appliance complies with all standards
switch on
for use’).
regarding electromagnetic fields (EMF). If handled
6 Clean the cutter with the short-bristled side of the
when I push
properly and according to the instructions in this
brush (Fig. 14).
the on/off slide
user manual, the appliance is safe to use based on
7 Brush the guard (Fig. 15).
upwards.
scientific evidence available today.
8 Put the shaving heads back into the shaving unit.
You may have inserted the
Preparing for use
9 Put the retaining frame back into the shaving unit
batteries incorrectly. Insert the
The appliance runs on two R6 AA 1.5-volt alkaline
and turn the wheel clockwise.
batteries correctly into the battery
batteries. We strongly advise you to use Philips Powerlife
compartment. Make sure the + and
batteries.
10 Put the shaving unit back onto the shaver.
- poles point in the right direction.
They supply sufficient energy for up to
60 minutes of shaving.
Tip: For optimal shaving performance, we advise you to
lubricate the shaving heads with a drop of sewing machine
inserting batteries
oil every six months.
1 Remove the lid of the battery compartment (Fig. 2).
storage
2 Put two batteries in the battery
-
Put the protection cap on the shaver after use to
compartment (Fig. 3).
prevent damage to the shaving heads (Fig. 6).
Make sure your hands and the appliance are dry when
Replacement
you insert the batteries.
Replace the shaving heads every two years for optimal
, Make sure the + and - poles of the batteries point
shaving results.
in the right direction
Replace damaged or worn shaving heads with HQ4+
Philips Micro+ Lift & Cut Shaving Heads.
Note: The appliance does not work if the batteries have
1 Switch off the shaver.
been placed incorrectly.
2 Remove the shaving unit (Fig. 8).
3 Put the lid of the battery compartment back onto
the appliance (‘click’).
3 Turn the wheel anticlockwise (1) and remove the
retaining frame (2) (Fig. 11).
Avoiding damage due to battery
4 Remove the shaving heads from the shaving unit
leakage
and replace them with new ones (Fig. 12).
-
Remove the batteries if you are not going to use the
appliance for a month or more.
5 Put the retaining frame back into the shaving unit
-
Do not leave empty batteries in the appliance.
and turn the wheel clockwise.
6 Put the shaving unit back onto the shaver.
Using the appliance
1 Remove the protection cap.
Accessories
2 Push the on/off slide upwards to switch on the
The following accessories are available:
shaver (Fig. 4).
-
HQ4+ Philips Micro+ Lift & Cut Shaving Heads
-
HQ110 Philips Shaving Head Cleaning Spray (not
3 Move the shaving heads quickly over your skin.
available in some countries)
Make both straight and circular movements (Fig. 5).
environment
Note: Shaving on a dry face gives the best results.
-
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
Note: Your skin may need 2 or 3 weeks to get accustomed to
at an official collection point for recycling. By doing
the Philips shaving system.
this, you help to preserve the environment (Fig. 16).
4 Push the on/off slide downwards to switch off the
-
Batteries contain substances that may pollute
shaver.
the environment. Do not throw away empty
batteries with the normal household waste, but
5 Put the protection cap on the shaver to prevent
dispose of them at an official collection point for
damage to the shaving heads (Fig. 6).
batteries. Always remove the batteries before you
discard and hand in the appliance at an official
Cleaning and maintenance
collection point.
Regular cleaning guarantees better shaving performance.
guarantee & service
every week: shaving unit and hair chamber
If you need information or if you have a problem, please
1 Switch off the shaver.
visit the Philips website at www.philips.com or contact
the Philips Customer Care Centre in your country
2 Brush the outside of the shaving unit with the
(you find its phone number in the worldwide guarantee
brush supplied (Fig. 7).
leaflet). If there is no Customer Care Centre in your
3 Remove the shaving unit (Fig. 8).
country, go to your local Philips dealer or contact the
4222.002.4835.1
2/9
...