Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Charging the appliance Charge the appliance when the motor stops or 4222.002.5459.1 starts running more slowly. HQ6071 Register your product and get support at 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 3 1 2 3 Put the appliance plug in the shaver (Fig. 6). Put the adapter in the wall socket. When the battery is fully charged, remove the adapter from the wall socket and pull the appliance plug out of the shaver. Cordless shaving time A fully charged shaver has a cordless shaving time of up to 40 minutes. Using the appliance shaving 1 Press the on/off button once to switch on the shaver. The light ring lights up. 2 Move the shaving heads quickly over your skin, making both straight and circular movements (Fig. 7). Shaving on a dr y face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 4 Press the on/off button once to switch on the shaver. To prevent damage to the shaving unit, put the protection cap on the shaver after every use (‘click’) (Fig. 8). Trimming For grooming sideburns and moustache. 1 Open the trimmer by pushing the slide upwards (Fig. 9). The trimmer can be activated while the motor is running. Cleaning and maintenance Regular cleaning guarantees better shaving performance. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water ever y time you have used the appliance. For thorough cleaning of the shaving heads, we advise you to use Philips Shaving Head Cleaning Spray HQ110. Every day: shaving unit and hair chamber Warning: Remove the detachable cord from the handheld part before cleaning this part in water. Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt. Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. 1 2 3 Press the release button (1) and open the shaving unit (2) (Fig. 10). Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time (Fig. 11). Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. 4 5 Rinse the outside of the appliance (Fig. 12). Close the shaving unit and shake off excess water. Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. 6 Open the shaving unit again and leave it open to let the appliance dry completely (Fig. 13). You can also clean the hair chamber without water by using the brush supplied. Every six months: shaving heads 1 Open the shaving unit. You can also pull the shaving unit off the shaver for easier cleaning. 2 3 Turn the wheel anticlockwise (1) and remove the retaining frame (2).Then take out the shaving heads (Fig. 14). Clean the cutters and guards with the brush supplied (your shaving heads may differ from the one shown in the figure) (Fig. 15). Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 4 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shavingunit and turn the lock clockwise (Fig. 16). Note: If you removed the shaving unit from the shaver, reattach it. First insert the hinge of the shaving unit into the slot in the rim of the hair chamber and then push the shaving unit home until it locks into place (‘click’). (Fig. 17) 5 Close the shaving unit. Trimmer Clean the trimmer ever y time you have used it. 1 2 3 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. Clean the trimmer with the brush supplied (Fig. 18). Lubricate the trimmer teeth with a drop of sewing machine oil every six months (Fig. 19). storage -To prevent damage to the shaving unit, put the protection cap on the shaver (‘click’) (Fig. 8). Replacement To maintain optimal shaving results, replace the shaving heads ever y two years. Replace damaged or worn shaving heads with HQ8 Precise Cutting System Shaving Heads. 1 2 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. Open the shaving unit. You can also pull the shaving unit off the shaver. 3 4 Turn the wheel anticlockwise (1) and remove the retaining frame (2).Then take out the shaving heads (Fig. 14). Put the new shaving heads in the shaving unit. Put the retaining frame back into the shaving unit and turn the lock clockwise. (Fig. 16) Note: If you removed the shaving unit from the shaver, reattach it. First insert the hinge of the shaving unit into the slot in the rim of the hair chamber and then push the shaving unit home until it locks into place (‘click’). (Fig. 17) 5 Close the shaving unit. Ordering accessories To retain the top performance of your shaver, make sure you clean it regularly and replace its shaving heads at the ...