Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
,, 2 EnglisH 11 21212121 3 4 5 Press the release button (1) and pull theshaving unit off the shaver (2). Tilt the trimmer slightly backwards and fit it onto the shaver. Remove the trimmer by pressing the release button again and pulling the trimmer off theshaver. Put the shaving unit back onto the shaver. cleaning and maintenance Regular cleaning guarantees better shaving performance. To maintain optimal shaving performance and to keep the shaver clean, you have to thoroughly rinse the shaving unit and hair chamber with hot water after every shave. Be careful with hot water.Always check if thewater is not too hot, to prevent your hands from getting burnt. Shaving unit and hair chamber Switch off the shaver. Press the release button (1) and open the shaving unit (2). 1 2 12 EnglisH 3 22 Clean the shaving unit and the hair chamber byrinsing them under a hot tap for some time. Rinse the outside of the shaving unit. Make sure the inside of the shaving unit and the hair chamber have been cleaned properly. Close the shaving unit and shake off excess water. 4 5 6 Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads. Open the shaving unit again and leave it open to let the appliance dry completely. Charging stand 1 2 Unplug the charging stand. Clean the charging stand with a moist cloth. Trimmer (HQ6730 and HQ6725 only) 1 2 Clean the outside of the trimmer with the brush supplied after every use. Open the trimmer to clean it on the inside. 3 storage EnglisH 13 OILOIL112112 Lubricate the trimmer teeth with a drop of sewing machine oil every six months. There are three ways to store the shaver: 1 you can store the shaver in the charging stand, even when it is wet. Always unplug the charging stand before storingthe wet or dry shaver in it. 2 you can store the shaver in the pouch supplied. 3 you can store the shaver by hanging it from the hanging cord, which can be attached to the appliance by means of the clip.This is the best way to let the appliance dry. replacement Switch off the shaver. Press the release button (1) and open theshaving unit (2). Turn the wheel anticlockwise (1) and remove the retaining frame (2). Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ167 Philips Cool Skin shaving heads only. 1 2 3 14 EnglisH 4 1111 5 6 Remove the shaving heads and place new ones in the shaving unit. Put the retaining frame back into the shaving unit, press the wheel (1) and turn it clockwise(2). Put the shaving unit back onto the shaver. accessories The following accessories are available: -HQ8500/8000 powerplug. -HQ167 Philips Cool Skin shaving heads. -HQ170 NIVEA FOR MEN Cool Skin Moisturising Shaving Lotion. -HQ171 NIVEA FOR MEN Cool Skin Extra Fresh Shaving Gel. Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. -The built-in rechargeable batteries contain substances that may pollute the environment. Always remove the batteries before you discard and hand in the appliance at an official collection point. Dispose of the batteries at an official collection point for batteries. If you have trouble removing the batteries, you can also take the EnglisH 15 appliance to a Philips ser vice centre.The staff of this centre will remove the batteries for you and will dispose of them in an environmentally safe way. Disposal of the batteries Only remove the batteries if they are completely empty. 1 Let the shaver run until it stops, undo the screws and open the shaver. 2 Remove the batteries. Do not put the shaver back into the charging stand after the batteries have be...
Otros modelos de este manual:Eléctrico - HQ6725/16 (1.71 mb)
Eléctrico - HQ6707/16 (1.71 mb)
Eléctrico - HQ6707/33 (1.71 mb)