Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
...your outdoor heating/cooling package unit is a valuable piece of equipment, designed and manufactured by the most modern methods. Proper care of your unit should result in many years of service and comfort. To keep your operating costs low and to eliminate unnecessary service calls, we have provided a few guidelines. These guidelines will help you understand how your heating/cooling unit operates and how to maintain it so you can get years of safe and dependable service. Read all the instructions in this manual, and keep all manuals for future reference. GAMA Certified The Gas Appliance Manufacturers Association (GAMA) symbol verifies that Annual Fuel Utilization Efficiency (AFUE) ratings for our gas package heating/cooling units have been derived from U.S. Government standard tests. Manufactured By ALLIED AIR ENTERPRISES, INC. A Lennox International Inc. Company 215 Metropolitan Drive West Columbia, SC 29170 *506299-01* – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – What to do if you smell gas: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach the gas supplier, call the fire department. – Installation and service must be performed by a qualified installer, service agency or the gas supplier. Failure to follow the safety warnings exactly could result in serious injury, death, or property damage. FIRE OR EXPLOSION HAZARD WARNING TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION ................2 OPERATING YOUR UNIT ....................................3 MAINTENANCE OF YOUR UNIT .........................5 REPAIR PARTS ....................................................7 WARRANTY .........................................................8 506299-01 Issue 0912 Page 1 IMPORTANT SAFETY INFORMATION 3. This unit is equipped with an ignition device which automatically lights the burners. See OPERATING WARNING YOUR UNIT on page 3 for information on lighting ELECTRICAL SHOCK, FIRE, and shutting down the unit. OR EXPLOSION HAZARD 4. Should the gas supply fail to shut off or if overheatingFailure to follow the safety warnings exactly occurs, shut off the gas valve to the unit beforecould result in dangerous operation, serious shutting off the electrical supply. injury, death, or property damage. 5. Do not use the unit if any part has been under water. Improper servicing could result in dangerous A flood-damaged unit is extremely dangerous. operation, serious injury, death, or property Attempts to use the unit can result in fire ordamage. explosion. A qualified service agency should be contacted to inspect the unit and to replace all gas • Before servicing, disconnect all electrical controls, control system parts, electrical parts that power to unit. have been wet, or the unit if deemed necessary. • When servicing controls, label all wires prior 6. Examine the unit installation to determine that: to disconnecting. Reconnect wires correctly. • Verify proper operation after servicing. A. All flue gas carrying areas external to the unit, such as the vent hood, are clear and free of obstructions. B. Return air duct connection(s) is physically sound and sealed to the unit casing. For your safety, read the following before operating your gas heating/electric cooling package unit: C. Physical support of the unit is sound without sagging, cracks, gaps, etc. 1. The area around the unit must be kept clear and free of combustible materials, gasoline, and other D. There are no obvious signs of deterioration of flammable vapors and liquids. the unit. 2. This unit requires air for combustion and ventilation E. Burner flames are in good adjustment (see to ensure both proper and safe operation. Burner Flame beginning on page 6). Combustion air is brought in through the condenser section. Do not block or obstruct the condenser 7. It is important that you conduct a physical coil or condenser fan opening. inspection of the unit at least twice a year. It is also recommended that the unit should be inspected by a qualified service agent at least once per year. Page 2 Issue 0912 506299-01 OPERATING YOUR UNIT These units are equipped with an ignition device which automatically lights the burners. Do not try to light the burners by hand. Before operating, smell around furnace area for gas. Be sure to smell near the unit base because some gas is heavier than air and will settle to the lowest point. See WHAT TO DO IF YOU SMELL GAS on page 1 if the odor of gas is present. Use only your hand to slide the gas control switch; never use tools. If the switch will not move by hand, don’t try to repair it. Call a qualified service technician. Force or attempted repair may result in a fire or explosion. Lighting Instructions 1. STOP! Read the previous safety information. 2. Set the thermostat to the l...