Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Do not use outdoors. Do not locate the heater immediately below a fixed socket outlet or connection box. Do not cover the heater. Do not place material or garments on the heater, or obstruct the air circulation around the heater, for instance by curtains or pushing furniture up against the heater, as this could cause overheating and a fire risk. NEVER cover or obstruct in any way the heat outlet slots at the top of the heater or the air inlet slots in the base of the heater. The heater must not be covered. WARNING -THE SURFACES OF THIS HEATER CAN BE HOT. Momentary contact with any part of the heater should not cause injury. However, aged or infirm persons or young children should not be left unsupervised in the vicinity of the heater unless a suitable guard is fitted. This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to ensure that they do not play with the appliance. Note that due care and consideration must be taken when using this heater in series with a thermal control, a program controller, a timer or any other device that switches on the heat automatically, since a fire risk exists when the heater is accidentally covered or displaced. If the supply cord is damaged it must be replaced by the manufacturer or service agent or a similarly qualified person in order to avoid a hazard. Electrical WARNING-THIS APPLIANCE MUST BE EARTHED The electrical installation must be carried out by a competent electrician, and be in strict accordance with the current I.E.E. regulations for Electrical Equipment in Buildings. The heater is fitted with a length of flexible cable type H05VV-F size 3 x 1.0mm2 on all models for connection to the fixed wiring of the premises through a suitable connection box positioned adjacent to the heater. A means for disconnection in all poles must be provided in the fixed wiring in accordance with the wiring rules. Supplementary Earth Bonding Should Equipotential Earth Bonding be required, the earthing conductor in the supply cord is deemed to provide the supplementary bonding connection (see Regulation 54703- 05, 16th Edition I.E.E. Wiring Regulations). General The TPR Convector is designed for wall mounting on the wall brackets supplied. It should only be operated when in the upright position as shown. All models are protected to IP24 standard. Models TPR2....W are fitted with a thermostat only. Models TPR2….TW are fitted with a thermostat and a 24 hour timer. Before connecting the heater, check that the supply voltage is the same as that stated on the heater. Wall Mounting IMPORTANT -The wall brackets supplied with the appliance must be used. The heater should be positioned observing the minimum clearances stated around the heater -see Fig.1. DO NOT locate the heater immediately below a fixed socket outlet or connection box. 1. Remove wall mounting bracket from t...
Otros modelos de este manual:Eléctrico - TPR2-1250W (1.56 mb)
Eléctrico - TPR2-1500W (1.56 mb)
Eléctrico - TPR2-2000W (1.56 mb)
Eléctrico - TPR2-750W (1.56 mb)