Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
9-я Подлесская, 25 (3412)59-28-05 34. Барнаул Vitek - сервис ул. Попова, 68 (3852) 35-37-50 35-37-51 35. Новосибирск ООО "Техмастер" ул. Большевитская, 131 (3832) 12-54-00 36. Омск Космос Космический пр-т, 97А, к.4 (3919)53-98-41 Получить информацию о других сервисных центрах Вы можете у продавца или по адресу в Интернет: ю ENGLISH FEATURES: 1. Comfortable and noiseless. 2. Smooth appearance, safe for family use. 3. Unique appearance, novel style. 4. With double pole rocker switch for changing into three different input powers. 5. With thermostat, convenient for controlling the room temperature. 6. With thermal fuse to avoid over-heating. SEAT BASE INSTALLATION: 1. Turn the appliance upside down. 2. Insert two seats to the body along the arrow direction. 3. Drive two screws tightly. 4. After finishing the installation, turn the appliance upright. INSTRUCTION: 1. Turning on the appliance Insert the plug into the suitable socket for the appliance, revolve the temperature regulator to the highest temperature (i.e. revolve the knob clock-wise to the end), and then turn on the power switch. The relevant indicator lamp is lit and the electric heater begins to work. Note; With regard to the socket with which the appliance is used for the first time or from which plug is often pulled out, please often check whether the plug fits the socket well so as to avoid contact fault which will make the socket overheated and burn the plug. 2. Regulating the temperature When using the appliance, if you feel that the room temperature is too high, you can lower it by two methods: (1) Turn off one power switch only turn on the "Middle" or "Low" switch. (2) Revolve the temperature regulator anti-clockwise from the highest temperature until the indicator lamp goes out. If the room temperature still needs to be lowered, you must wait until the indicator lamp is lit automatically and continue to revolve the knob until the lamp goes out again. At that time, the electric heater is in the state of working intermittently. And the indicator lamp will be lit and go out from time to time. 3. Turn on the fan If you want to use fan assistant convection function, turn on the fan switch. -Q~ 3 4. Turning off the appliance Turn off the power switch, the indicator lamp goes out and pull out the plug from the outlet. MAINTENANCE: 1. Always pull out the plug before cleaning or repairing any appliance. 2. Do not knock against or rub the appliance so as to avoid damaging the coating and rusting It. 3. When the appliance will not be used for a long time, please clean it and put it into a dry packing box. 4. Never immerse the appliance in water for cleaning. SAFETY NOTICES: 1. It is absolutely wrong to overturn the appliance to use. 2. The appliance can only be used indoor. It cannot be used in the places full of vapor, ash or in inflammable, explosive air. 3. When using the appliance. Put it more than 20 centimeters away from the wall...