Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
TABLE OF CONTENTS SAFETY CONSIDERATIONS .....................................................1 INTRODUCTION..........................................................................2 LOCATION....................................................................................3 General ......................................................................................3 Location Relative to Cooling Equipment ................................3 INSTALLATION ...........................................................................3 Air for Combustion and Ventilation ........................................3 General ......................................................................................4 Unconfined Space .....................................................................4 Confined Space .........................................................................4 All Air from Inside the Structure .......................................4 All Air from Outside of Structure ......................................5 Duct Work Recommendations ............................................5 Venting.................................................................................5 Oil Burner............................................................................6 Oil Connections ...................................................................6 Barometric Draft Control ....................................................6 Electrical Connections.........................................................6 Horizontal or Downflow Installation..................................7 Filters ...................................................................................7 START-UP, ADJUSTMENT, AND SAFETY CHECKOUT......7 Operational Checkout ...............................................................7 Combustion Check....................................................................7 Fan Adjustment Check ...........................................................10 Limit Control Check...............................................................11 For Year-Round Air Conditioning .........................................11 Heating ....................................................................................11 Cooling....................................................................................11 Constant Blower Switch .........................................................11 MAINTENANCE.........................................................................11 General ....................................................................................11 Oil Burner ...............................................................................11 Heat Exchanger and Flue Pipe...............................................11 Blower Removal .....................................................................12 SAFETY CONSIDERATIONS FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. DO NOT ATTEMPT TO START THE BURNER WHEN EXCESS OIL HAS ACCUMULATED, WHEN THE FURNACE IS FULL OF VAPOR, OR WHEN THE COMBUSTION CHAMBER IS VERY HOT. A97247 Fig. 1—58CMA Multipoise Oil Furnace For use with grade 1 or 2 Fuel Oil. Do not use Gasoline, Crankcase Oil, or any Oil containing Gasoline! Failure to follow this warning could lead to sooting, fire, explosion, and/or severe bodily harm. Never burn garbage or paper in the heating system and never leave rags, paper, or any flammable items around the unit. Failure to follow this caution will result in minor unit or property damage. These instructions are intended to be used by qualified personnel who have been trained in installing this type of furnace. Installation of this furnace by an unqualified person may lead to equipment damage and/or a hazardous condition which may lead to bodily harm. All local and national code requirements governing installation of oil burning equipment, wiring, and flue connections must be followed. Some of the codes (issued by the Canadian Standards Association, the National Fire Protection Agency, and/or the American National Standards Institute) that may be applicable are: Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations. Book 4 PC 101 Catalog No. 535–80076 Printed in U.S.A. Form 58CMA-4SI Pg 1 9-03 Replaces: 58CMA-3SI Tab 6a 8a 3. 19. 20. 20. 19. 2. PULL OIL INLET (BOTH SIDES) VENT CONN ELECTRICAL CONNECTIONS (BOTH SIDES) .88 DIAM TYP KNOCK-OUT BOTH SIDES FOR J DIAM VENT TOP KNOCK-OUT FOR J DIAM VENT A E G B L H C D F K 3. 19. 20. 20. 19. 2. PULL OIL INLET (BOTH SIDES) VENT CONN ELECTRICAL CONNECTIONS (BOTH SIDES) .88 DIAM TYP KNOCK-OUT BOTH SIDES FOR J DIAM VENT TOP KNOCK-OUT FOR J DIAM VENT A E G B L H C D F K A98037 Dimensions (IN.) UNIT SIZE A B C D E F G H J K L 105-12 35 48-3/4 30-1/4 16-5/8 20 22 12 14 5 1-1/2 1-3/4 120-20 39-1/2 53 32-1/4 18-3/4 24 28 12-9/...